User manual CANON PIXMA IP6700D

[. . . ] Do not touch the open ink port once the protective cap is removed, as this may prevent the ink from being ejected properly. Protective cap Paper output tray 2 Remove the orange protective cap from the print head. 2 Close the cover. Plug the power cord into the 2 Pinch the paper guide and slide it to the left. back of the printer and connect the other end to a power outlet. [. . . ] · Before installing the driver, disable all anti-virus programs and automatically loading programs. · Do not remove or insert the USB cable during installation, as this may result in the computer or printer not operating normally. 6 When the main menu appears, click Easy Follow the on-screen instructions to install the software. If the message asking for your confirmation to restart your computer appears, click OK. The system is restarted automatically. 7 When the Printer Connection screen appears, You can load paper in both the auto sheet feeder and cassette. 1 Pull out the cassette from the bottom of the printer. 1 TURN THE PRINTER OFF. You hear the operation sound until the printer is turned off. It may take about 30 seconds. 2 Turn the computer on and start Windows. NOTE: ·For Windows XP or Windows 2000, log on to Windows as a member of Administrators group before continuing. ·Before installing the driver, disable all antivirus programs and automatically loading programs. Then proceed from step 3 to install the printer driver. connect the USB cable to the computer and the other end to the printer. Cassette 1 Connect the printer to the computer with the USB cable. NOTE: Select Easy Install in order to install the application software, electronic manuals and printer driver. Select Custom Install in order to choose the options you would like to install. 7 When the Easy Install screen appears, click Install. Cover 2 Remove the cover of the cassette. 3 For A5 or larger sized paper, pull the tab 8 TURN THE PRINTER ON. 2 Turn on the computer and start Mac OS X. IMPORTANT: If you cannot proceed to the next procedure after two minutes, refer to "Troubleshooting" instructions in the Quick Start Guide. towards you to unlock before extend the cassette. 3 Insert the Setup CD-ROM. NOTE: · If the CD-ROM folder does not open automatically, double-click the on the desktop. NOTE: If you point to an application in the list, the explanation for the printer driver or an application is displayed. 3 Insert the Setup CD-ROM. The setup program should run automatically. 4 When the main menu appears, click Easy If the message asking for your confirmation to restart your computer appears, click OK. The system is restarted automatically. 9 Follow the on-screen instructions to 8 Read the License Agreement, then click Yes. 4 Double-click the Setup icon. Follow the on-screen instructions to install the software. 9 Follow the on-screen instructions to register Tab Install and follow the on-screen instructions. install the remaining software. When the Installation Results screen appears, click Next. your product. 10 When the Installation completed successfully screen appears, click Restart. [. . . ] For additional information visit the electronic User's Guide. If Restart is displayed, ensure the Restart the system now (recommended) check box is selected, then click Restart. Part no. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. [. . . ]