User manual CANON PC795 BROCHURE

[. . . ] only). DIM-883 English Français HD Camcorder CANADA CANON CANADA INC. NATIONAL HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7 CANON CANADA INC. CALGARY 2828 16th Street NE, Calgary, Alberta T2E 7K7 CANON CANADA INC. MONTREAL 8801 Route Transcanadienne, Saint-Laurent, Quebec H4S 1Z6 ❖ If you have any questions, call the Canon Canada Information Center toll free (in Canada only) at 1-800-OK-CANON (1-800-652-2666). [. . . ] • If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy still images to the memory card. • Still images recorded with another device may not be copied correctly. Other Functions You Can Use when Taking Photos 1 Move the zoom lever toward W. The still image index screen appears. 2 Select the memory from which you want to copy the still images. Refer to To select which still images to play back ( 65). You can also use the following functions. . . The following functions and features of the camcorder can be used either for shooting video or for taking photos. The way to set and use them was already explained in detail, so we refer you to the relevant page in the “Video” section. • Zoom ( 37) • Quick Start ( 37) • Recording programs ( 45, 47) • Mini video light ( 48) • Self timer ( 49) • Automatic backlight correction and manual exposure adjustment ( 50) • Manual focus adjustment ( 51) • White balance ( 51) • Image effects ( 53) • Digital effects ( 54) 3 If you want to copy only one image, select ( , ) the still image you want to copy. 4 Copy the still image(s). FUNC. FUNC. [ Desired option COPY] [YES]* [OK]** * When copying all the still images, press twice to interrupt the operation while it is in progress. ** Only when copying all still images. IMPORTANT Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. 72 D128S_NTSC_E. book Page 73 Thursday, June 5, 2008 4:01 PM Printing Photos Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the still images you want to print and set the desired number of copies as a print order ( 77). • If the device type selection screen appears, select [PC/PRINTER] and press . • The (print/share) button lights up and the current print settings will be displayed for approx. IMPORTANT • If continues to flash (for more than 1 minute) or if does not appear, the camcorder is not correctly connected to the printer. [ PAPER SIZE]→ Canon printer ↓ PIXMA SELPHY DS SELPHY CP/ES 1 2 [CREDITCARD] – 2, 4 or 82 [9 x 13 cm] – 2 or 4 [10 x 14. 8 cm] 2, 4, 9 or 161 2 or 4 [A4] 4 – You can also use the special sticker sheets. SELPHY CP: When you use the wide-sized photo paper with the [DEFAULT] setting, you can also use [2-UP] or [4-UP]. 75 D128S_NTSC_E. book Page 76 Thursday, June 5, 2008 4:01 PM Photos PRINT ERRORS If an error occurs while printing, an error message, for example [NO PAPER], will appear on the camcorder. Solve the problem referring to the error message list ( 109) and to the printer's instruction manual. • Canon's PictBridge-compatible printers: If printing does not resume automatically after you solved the problem, select [CONTINUE] and press to resume printing. If that option is not available, select [STOP] and press and then restart printing from the beginning. • Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection. Trimming Settings Set the paper size and page layout before changing the trimming settings. 1 Open the print settings menu. Refer to steps 1-2 in Printing after Changing the Print Settings ( 75). 2 Select ( , ) [TRIMMING] and press . • Move the zoom lever toward T to shrink the frame, and move it toward W to enlarge it. • To cancel the trimming settings, move the zoom lever toward W until the trimming frame disappears. 3 Change the size of the trimming IMPORTANT • You may not be able to print correctly with a PictBridge-compatible printer still images whose file names have been changed or that were recorded, created, edited or changed with any device other than this camcorder. • If [BUSY] does not disappear, disconnect the USB cable and restore the connection after a short while. 4 Move ( , ) the trimming frame to the area of the picture you want to print. 76 D128S_NTSC_E. book Page 77 Thursday, June 5, 2008 4:01 PM 5 Press FUNC. • The print area selected will be indicated by a green frame within the still image's thumbnail. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]