Detailed instructions for use are in the User's Guide.
[. . . ] *Diverse applications include; remote control studio production, point of view cameras, cameras installed in inaccessible locations, as well as many others. *The optional Extender Changeover Unit will enable the extender of the lens to be controlled remotely.
* The 2X extender of ITS-ME model is manually operated. ITS-RE model which has a motorized 2X extender is also available.
Additionally, Canon has also added the world’s first pro-video Remote Control lens, the YH16x7 KTS-AF, equipped with Canon’s advanced Self Contained Auto Focusing system. The system will allow the lens to focus on an object automatically by analyzing the video signal from the camera wholly within the lens unit. [. . . ] These lenses are also available with a simple interface for use with custom controllers.
M. O. D from Lens Front Object Dimensions 4:3 Aspect Ratio at M. O. D (with Extender) Approx. Size(WxHxL) Approx. Mass Macro
0. 9m(10mm with Macro) 85. 2x63. 9cm at 8. 5mm 4. 4x3. 3cm at 170mm
0. 4m(10mm with Macro) 68. 1x51. 1cm at 6mm 5. 0x3. 8cm at 78mm
TCR-101F
Controller**
*Only for 2/3" lenses. **For DXC-990, please contact Canon Sales office for information.
113. 7x91. 4x170. 4mm 1. 31kg (2. 89lbs) Yes
21. 6 2±0. 2
CONTROL CABLE LENS CABLE
115. 8x95. 5x211. 7mm 1. 69kg (3. 73lbs) Yes
23. 2 2±0. 2 2±0. 02
CONTROL CABLE LENS CABLE
TCR-101F
The TCR-101F is a basic controller that provides push-button control of zoom, focus, and iris. There also is a switch for remote or auto iris.
Zoom Speed Adjusting Knob
TCR-201F
The TCR-201F provides more exact control of zoom, focus, and iris through the use of positional servos. There also is a switch for remote or auto iris.
Zoom Operation Knob Focus Operation Knob
TCR-301F
The TCR-301F can present zooming and focusing operations for up to eight shots. Zooming and focusing can be made by pressing the ZOOM/FOCUS/PRESET buttons suited for your application.
Iris Speed Adjusting Knob Connector Iris Operation Button Connector Iris Camera/Local Change-Over Switch
C CAM. FOCUS F N
DIMENSION:
95
95
2±0. 02
82P0. 75 85
8. 5
113. 7
INDEX MARK
162. 3 122
INDEX MARK SWITCH FOR SELECTING AUTO / MANUAL FOCUS
Focus Speed Adjusting Knob Connector
IRIS
O
58. 5
TCR - 101 F
Connector
IRIS CAM. LOC.
TCR - 301 F
ZOOM/FOCUS PRESET
ZOOM 4 1 2 3
45˚
CONT.
4 20˚ 5˚
SWITCH FOR SELECTING AUTO / MANUAL FOCUS
ZOOM
FOCUS
40
Iris Camera/Local Change-Over Switch
ZOOM
W
TCR - 201 F
FOCUS IRIS CAM. LOC.
40
40
20˚
SWITCH FOR SELECTING AUTO / MANUAL ZOOM
127. 9
SWITCH FOR SELECTING AUTO / MANUAL ZOOM
Trimmer Cap Iris Camera/Local Change-Over Switch Preset Position Change Over Button(1~8) Zoom Speed Adjusting Knob Iris Operation Knob Focus Speed Adjusting Knob
5 6 7 8
Manual Operation Change Over SW
SLOW W T
FAST
SLOW N F
FAST
SLOW C O
FAST
(80) 91. 4
(80) 95. 5
102
Iris Speed Adjusting Knob Connector
W T N F C
CAM.
40
53. 3 41
40
40
SWITCH FOR SELECTING AUTO / MANUAL IRIS
SWITCH FOR SELECTING AUTO / MANUAL IRIS
O
Zoom Operation Button Focus Operation Button
Zoom Operation Button Focus Operation Button
Iris Operation Button
(Unit:mm)
F. B. ADJUSTING LOCK SCREW
70
˚
30˚
54. 5
68
ZOOM LEVER (TELE POSITION)
68
TRIMMER FOR ADJUSTING IRIS GAIN
F. B. ADJUSTING LOCK SCREW ZOOM LEVER (TELE POSITION)
30˚
68 115. 8
TRIMMER FOR ADJUSTING IRIS GAIN
CANON STANDARD CONTROL CABLES
CANON provides ready made connection cables in 5m, 10m, 20m, 50m, and 100m lengths. The cable length can be extended up to 150m by connecting several cables when telecommunications control box TCR-101F/TCR-201F or TCR-301F are used.
1/2 inch Pro-video Remote Control lens
Image Format Covered Zoom Ratio Built-in Extender Range of Focal Length Maximum Relative Aperture 1/2" 19X 6. 7~127mm
TCC-005M: 5m cable TCC-010M: 10m cable TCC-020M: 20m cable TCC-050M: 50m cable TCC-100M: 100m cable
Circuit Diagram
YH19x 6. 7 KTS
1/2" 16X 7~112mm 1:1. 9 at 7~106. 4mm 1:2. 0 at 112mm 49. 1˚x37. 8˚ at 7mm 3. 3˚x2. 5˚ at 112mm 1. 0m(10mm with Macro) 83. 3x62. 5cm at 7mm 5. 3x4. 0cm at 112mm 108. 4x80. 8x151. 9mm 0. 94kg (2. 07lbs) Yes
151. 9 29. 3
CONTROL CABLE LENS CABLE
YH16x 7 KTS
1/2" 16X 7~112mm
Auto Focus Lens YH16x 7 KTS-AF
PIG TAIL CABLE CN1
PIG TAIL CABLE(50cm) CN2 FOCUS POSITION(7. 5V)/SPEED(OPEN)SIG 1 ZOOM POSITION(7. 5V)/SPEED(OPEN)SIG 2 GND 3 IRIS LOCAL(0V)/CAMERA(OPEN)SIG 4 IRIS CONTROL (CLOSE 7. 5V/OPEN 2. 5V)* 5 POWER(DC12V) 6 SIGNAL COMMON(+5. 0V) 7 FOCUS CONTROL ( FAR 7. 5V/ NEAR 2. 5V ) 8 ZOOM CONTROL (TELE 7. 5V / WIDE 2. 5V) 9 IRIS POSITION ( 7. 5V )/SPEED ( OPEN ) SIG 10 +V1(+7. 5V) 11 -V1(+2. 5V) 12
TCC • CABLE
(5/10/20/50/100m)
CONTROLLER
CN5
1 2 3 4 5 6 7 8 9 10 11 12
CN3 CN4
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
SPEED CONTROL
IRIS MODE CAMERA LOCAL IRIS 10k OPEN FAR FOCUS 10k NEAR TELE ZOOM 10k CLOSE
1:1. 4 at 6. 7~89mm 1:2. 0 at 127mm 51. 1˚x 39. 4˚ at 6. 7mm 2. 89˚x2. 17˚ at 127mm 0. 9m(50mm with Macro) 77. 2x57. 9cm at 6. 7mm 4. 2x3. 2cm at 127mm 114. 5x92. 6x181. 6mm 1. 43kg (3. 15lbs) Yes
95
1:1. 9 at 7~106. 4mm 1:2. 0 at 112mm 49. 1˚x37. 8˚ at 7mm 3. 3˚x2. 5˚ at 112mm 1. 0m(50mm with Macro) 83. 3x62. 5cm at 7mm 5. 3x4. 0cm at 112mm 113. 5x80. 0x148. 8mm 0. 9kg (1. 98lbs) Yes
35. 74 1. 7±0. 2 2±0. 02
VIDEO IN CONNECTOR
TO CAMERA
WIDE
Angular Field of View
4:3 Aspect Ratio
M1
IRIS
M2
M3
FOCUS ZOOM
TCR101F CN6 POSITION CONTROL
1 2 3 4 5 6 7 8 9 10 11 12
IRIS MODE CAMERA CLOSE LOCAL IRIS 10k OPEN FAR FOCUS 10k NEAR TELE 10k ZOOM WIDE
M. O. D from Lens Front Object Dimensions 4:3 Aspect Ratio at M. O. D Approx. Size(WxHxL) Approx. Mass Macro
*In case of the KTSM version, No. 5 pin is the setup of <CLOSE 2. 5V/OPEN 7. 5V>
CANON REMOTE CONTROL LENS
Model CN1 2 3 4 5 6
HR10A-10P-12S HR10A-10J-12P HR10A-10P-12S HR10A-10R-12P HR10A-10R-12P
MFG
HIROSE HIROSE HIROSE HIROSE HIROSE
Canon Part No.
BH7-0790 BH7-0789 BH7-0790 BH7-0791 BH7-0792
Varies depending on type of Camera.
DIMENSION:
A
39. 7
29. 3
85
148. 8
39. 7
82P0. 75
72X0. 75 75 82X0. 75
YH19 x6. 7 KTS IX12
19x
*In addition, the TCR-301F offers an 8 shot preset memory of zoom and focus. Extender Circuit Diagram
D1
TCR201F
2
CONTROL CABLE
YJ19x 9B ITS (with 2x Extender type)
116
181. 63 122
SWITCH FOR SELECTING AUTO / MANUAL FOCUS SWITCH FOR SELECTING AUTO / MANUAL ZOOM
M F A M Z A
39. 51
LENS CABLE
TRIMMER FOR ADJUSTING IRIS GAIN
CAMERA CABLE CONTROL CABLE
116
SWITCH FOR SELECTING AUTO / MANUAL IRIS & ZOOM
IRIS GAIN M I A
MODEL:HR10A-7R-6P MFG:HIROSE CANON Part No. BH7-1184
CN1 1 2
D3
SW1 M1 D4
102
80
M I A
DIP SWITCH TRIMMER FOR ADJUSTING IRIS GAIN AUTO F. B. SWITCH
* Extender is controlled by ± 6v on pins No. 4 and No. 5. * A mating connector is supplied with the lens.
75
SWITCH FOR SELECTING AUTO / MANUAL IRIS
IRIS GAIN
75
M Z A M F A
Connector
95
95
3 4 5 6 YEL GRN SW2 D2
(Unit:mm)
TRIMMER FOR ADJUSTING IRIS GAIN
68
SWITCH FOR SELECTING AUTO / MANUAL IRIS, ZOOM, FOCUS
TRIMMER FOR ADJUSTING FOCUS
68
73. 5
HOOD
Optical Accessories for Remote Control Lenses
Auto-Adjustment of Back Focus
●By
Additional Features
High Speed Focus, Low Noise
●By
1. CLOSE-UP LENS
●A
simply pressing a switch located on the front side of the lens drive unit, you will be able to adjust Back Focus automatically and accurately.
adopting a Rear Focus System design*, the lens features high speed focusing of 1. 5sec (when controlled by remote manual operation) while at the same time, decreasing the motor noise of the lens.
close-up lens is used to shorten the M. O. D. And the maximum object distance becomes the focal length of the close-up lens. There are the following four models of close-up lenses corresponding to the kind of the master lens.
MODEL 82CL-UP800H 82CL-UP1300H 105CL-UP900H 105CL-UP800HD CLASS SDTV SDTV SDTV HDTV APPLICABLE LENSES J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7, YH16x7 J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7, YH16x7 J22ex7. 6B HJ22ex7. 6B
82CL-UP800H 82CL-UP1300H 105CL-UP900H 105CL-UP800HD
Imaging range for J17ex7. 7B and YJ20x8. 5B with close-up lenses
J17ex7. 7B
*The Rear Focus System
YJ20x8. 5B Tele end : 170mm Wide end : 8. 5mm Tele end : 170mm Wide end : 8. 5mm
Optical Performance
816x609 390x293 67x50 26x20 1341x1006 494x371
●Between
WIDE 2. CONVERTER
● Focal
TELE-SIDE 3. CONVERTER
● Focal
4. EXTENDER
● In
the wide end and the tele end, no matter what distance the object is, the YH16x7 KTS-AF will always maintain high optical performance .
Usually, the Focus is adjusted by the Front Lens Unit, however, the focus lens unit of the YH16x7 KTS-AF is located behind the zoom lens unit. By this lens design, the focus lens unit has become much smaller and lighter, and allows for a high performance focus response.
length is becomes wider by a factor of 0. 8x that of the original lens with the W80-3B, W80Y-85 and W80-HD. ● The minimum object distance becomes 0. 64 times with the W80-3B, W80Y-85 and W80-HD.
MODEL W80-Y85 W80-3B W80-HD ADAPTOR 85-2 98-2 85-2 98-2 APPLICABLE LENSES YJ20x8. 5B, YJ19x9B, YH19x6. 7 J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7 J22ex7. 6B HJ17ex7. 7B HJ22ex7. 6B
length shifted to the telephoto side by a factor of 1. 5x. Only the telephoto side of the lens can be used, the picture corners are eclipsed at wide angle. The minimum object distance becomes 2. 25 ● times that of the original lens.
MODEL T15-2 T15-HD ADAPTOR 85-2 98-2 85-2 98-2 APPLICABLE LENSES J17ex7. 7B, YJ20x8. 5B, YJ19x9B, YH19x6. 7 J22ex7. 6B HJ17ex7. 7B HJ22ex7. 6B
case of an extreme telephoto or high magnification shot is required, a 2x extender is available. ● Only for 2/3" lenses.
SPECIFICATIONS
YH16x7 KTS-AF
Image Format Covered Zoom Ratio Range of Focal Length Maximum Relative Aperture Angular Field of View Minimum Object Distance Object Dimensions at M. O. D. Macro Object Dimension at macro Size(W x H x L) Mas. (Apprrox. ) 1/2 inch 16X 7 - 112mm 1:1. 9 at 7~106. 4mm 1:2. 0 at 112mm 49. 1˚x37. 8˚ at 7mm 3. 3˚x2. 5˚ at 112mm 1. 0m 83. 3x62. 5cm at 7mm 5. 3x4. 0cm at 112mm 50mm 7. 6x5. 7cm at 7mm 113. 5x80. 0x148. 8mm 0. 9kg
Follow Focus System
Even though the lens automatically focuses on a specific object, by using the "Follow Focus Function", you can simply redirect the focusing position to an area nearer or farther away from the current focused position. [. . . ] If used by an existing positional servo controller, the lens will automatically focus on the object, however, it cannot remotely control ON/OFF of the AF function or use the Follow Focus Function. If used by an existing speed servo controller, you will be able to use the Follow Focus Function. However, you will not be able to remotely control ON/OFF of the AF function. *By modifying the inter-face of the controller, you will be able to resolve the above mentioned situations. [. . . ]