User manual CANON IMAGERUNNER ADVANCE C5045

[. . . ] However, as we are constantly improving our products, if you need an exact specification, please contact Canon. The machine illustration on the cover may differ slightly from your machine. i TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 3 Legal Notices Trademarks Canon, the Canon logo, imageCLASS, and NetSpot are trademarks of Canon Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product and brand names are registered trademarks, trademarks or service marks of their respective owners. [. . . ] ­ To specify the protocol settings using NetSpot Console, you must log in as Administrator. For instructions on how to use NetSpot Console, see online help for NetSpot Console. on the web browser (Remote UI), the change is not reflected in the setting display. When you check on the machine, you can check by <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, or by printing a USER'S DATA LIST. (See Chapter 13, "Machine Settings, " in the Basic Guide. ) 8 Table of Contents Index 3-16 TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 6. Use [ ] or [ ] to select <ON> or <OFF>, then press [OK]. <ON>: Uses LPD as the print application. Use [ [OK]. 7. ] or [ ] to select <SET IP ADD RANGE>, then press [OK]. ] or [ ] to select <ON>, then press 3 Remote UI Use the numeric keys to enter the port number, then press [OK]. Use [ ] or [ ] to select <ON> or <OFF>, then press [OK]. <ON>: Uses Raw as the print application. Confirm that <PERMIT/REJECT> is displayed, then press [OK]. 17. Use [ 5 Reports and Lists ] or [ ] to select <REJECT> or <PERMIT>, then press [OK]. <PERMIT>: Permits the IP addresses of computers from which data (print/fax job) can be sent to the machine. <REJECT>: Restricts the IP addresses of computers from which data (print/fax job) can be sent to the machine. 6 Troubleshooting 10. 8. In [Raw Settings], specify whether to display the current print setting by using a Raw application. In [Use IP Address Range Settings], specify whether to restrict access from computers whose IP address are specified in this section. In [RX MAC Address Settings], specify whether to restrict access from computers whose MAC address are specified in this section. Remote UI 4 System Monitor 9. 5 Reports and Lists 10. 6. Specify the [IP Address], [Subnet Mask], and [Gateway Address] settings. In [Use LPD], specify whether to display the current print setting by using an LPD application. 6 Troubleshooting 7 Appendix 8 Table of Contents Index 3-21 TOP Back Previous Next Advanced Fax Features Advanced Copy Features Network 1 2 3 Setting Up a Computer for Printing/Sending a Fax Connecting to a TCP/IP Network All computers that use the machine must have TCP/IP client software installed and must be enabled for TCP/IP network use. Installing the Printer Driver and Specifying the Machine Destination Setting To print from a computer, you must install a printer driver and specify a setting for the machine destination. The machine destination setting differs depending on the print application used for printing. Use the following information as a guide to determine the print application you are using, and then perform the necessary operations. Raw: This is a print application used with Windows 2000/XP/ Server 2003. It can print at higher speeds than LPD. Machine Connection Method (LPD/Raw) 1. Open the printer properties dialog box. ­ For Windows 2000, click [Start] on the Windows task bar [Settings] [Printers]. ­ For Windows XP Professional/Server 2003, click [start] on the Windows task bar [Printers and Faxes]. [. . . ] It provides a way for a computer to communicate only with others sharing the same Scope ID. Report A document printed by the machine and containing information about the faxes it has sent or received. Remote UI 4 System Monitor Resolution The density of dots for any given output device. Low resolution causes font characters and graphics to have a jagged appearance. Higher resolution means smoother curves and angles as well as a better match to traditional typeface designs. Resolution values are represented by horizontal data and vertical data, for example, 600 x 600 dpi. Sending A fax document that has been scanned by a fax machine and sent over telephone lines, in the form of electrical pulses, to another fax machine. [. . . ]