User manual CANON IMAGERUNNER 2530I

[. . . ] Other brand and product names are trademarks or registered trademarks of their respective companies. In this manual, Microsoft® and Microsoft® Windows® are referred to as Microsoft and Windows respectively. Copyright Copyright ©2002 Canon Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc. Notice The information in this document is subject to change without notice. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. [. . . ] (3) Restore Defaults resets all the current settings to their default values. Gutter Settings Clicking Gutter in the Finishing tab window opens the Gutter Settings dialog box. Gutter lets you specify the gutter width in a range between 0 and 1. 2 inches. 3-16 I Quality Tab Specifies the settings for print quality including the resolution and contrast. For more information on Profiles, see page 3-12. (1) (2) 3 Printer Properties (3) (4) (5) (6) (7) (1) Objective lets you select the best setting for the print job according to document content. (2) Resolution lets you select the printer's resolution in dot per inch (600 dpi or 300 dpi). (3) Manual Grayscale Settings allows you to set the grayscale manually. Checking this checkbox enables Grayscale Settings (5) to access the dialog box which allows you to set the grayscale for images ( p. (4) Print Samples prints nine thumbnails per sheet to provide the print samples with the current grayscale settings when printing the document. This option is enabled only when the Manual Grayscale Settings (3) checkbox is checked. (6) Restore Defaults resets all the current settings to their default values. (7) About displays the version information on the Canon imageCLASS D300. 3-17 Detailed Settings for Objective Clicking Details in the Quality tab window opens the Detailed Settings for Objective dialog box. This dialog box allows you to specify the detailed settings for print quality. (1) (2) (3) (1) Monochrome Halftones lets you select a halftone pattern from the drop-down list. Printer Properties (2) Enable Image Correction corrects the roughness of image and inaccuracy in interpolating when printing an enlarged image in low-resolution. (3) Toner Save lets you select the setting for saving the toner consumption. 3 Edit Grayscale Settings Clicking Grayscale Settings in the Quality tab window opens the Edit Grayscale Settings dialog box. Refer to your Windows operating system documentation for more information. 3 Printer Properties I Advanced Tab Specifies the settings for print spooling. Refer to your Windows operating system documentation for more information. Spool print documents so program finishes printing faster and Start printing immediately are set automatically when you install the printer driver. 3-23 I Color Management Tab Associates color profiles with your color printer. Refer to your Windows operating system documentation for more information. 3 Printer Properties I Security Tab Specifies security settings. Refer to your operating system documentation for more information. 3-24 I Profile Tab Allows you to add, edit, and select a profile to be applied to print jobs. (1) (2) (3) (6) (4) (5) (8) (7) (9) (10) 3 Printer Properties (1) Profile List displays the list of registered profiles. (2) Name displays the name of the profile currently selected in Profile List (1). (4) View Settings displays the settings of the currently selected profile. (5) Add opens the Add/Edit Profiles dialog box which allows you to register a new profile ( p. (6) Edit opens the Add/Edit Profiles dialog box which allows you to edit the registered profiles ( p. When any of the pre-defined profile ([Default Settings], [2 on 1 [1sided]], or [Confidential]) is selected in Profile List (1), this button is disabled. When any of the pre-defined profiles is selected, this button is disabled. Checking Allow Profile Selection (9) enables the selecting of profiles in the Document Properties dialog box. [. . . ] Once a file has been printed, it is removed from the print queue. R Random Access Memory (RAM) The working memory of the computer in which programs and data are temporarily stored while you use them. Resetting or shutting off the computer clears all information from RAM. Printing very complicated documents might require closing other running programs or adding more RAM to the computer. See also Physical RAM, Virtual memory. G-5 Resolution The density of dots for any given output device, expressed in terms of dots per inch (dpi). [. . . ]