User manual CANON I550

[. . . ] 3 Raise the gray lock lever. Print Head IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 4 Insert the remaining three ink tanks into 2 Connect one end of the parallel cable to Press the POWER button. their assigned slots. the computer, the other to the printer. (IEEE 1284 compliant) 3 Open the front cover. [. . . ] Remove the protective tape. 4 Gently slide the print head into the holder. The print head will rest at a slight angle. Open and pull out the paper rest and the output tray. Parallel Cable Protective tape 5 Lower the gray lock lever until it locks Serial number Documentation and Software Kit into place. Secure Wire Clips NOTE: The "i550 Setup Software & User's Guide" CD-ROM contains printer drivers, software applications and electronic manuals. Write down the serial number located to the right of the print head. You will need this later to register the product. Parallel Cable Parallel Port Continue with Step 6 on side two. 6 Install the Printer Driver (Windows ) ® 6 6 When the driver installation is complete, Install the Printer Driver (Macintosh®) 7 Align the Print Head 7 From the Application folder, double-click on 7 1 Be sure to TURN THE PRINTER OFF before M ac in to sh W in do ws continuing. POWER Button POWER Lamp Off click Finish. IMPORTANT: Drivers included with this printer support Mac 8. 6-9. x. For Mac OS X driver and instructions, go to www. canontechsupport. com. NOTE: Screen shots may differ depending on the operating system used. the software to be installed. The setup program should run automatically. NOTE: If the setup program does not run automatically, double-click My Computer, then double-click the CD-ROM icon. click OK, then Exit. 10 To ensure highest quality output, continue 4 Click Install. Click the Utilities button. 11 Close the Chooser. with Step 7 Align the Print Head. 3 Read the License Agreement, then click c. Click the Print Head Alignment icon. Yes to continue. 4 When the main menu appears, click 5 If the message "No other applications can be NOTE: Register your product at www. registercanon. com to ensure product support. Install. running. . . " displays, click Continue. 12 To ensure highest quality output, continue with Step 7 Align the Print Head. 6 When the "Installation was successful" screen displays, Restart your computer. 5 When the Printer Port window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. e. [. . . ] Follow the on-screen instructions to complete print head alignment. 3 Click OK (Windows) or Close (Macintosh) when finished. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i550 Quick Start Guide for instructions. QA7-2270-V01/082002A ©2002 Canon U. S. A. , Inc. [. . . ]