User manual CANON FS200

[. . . ] DIE-323 Digital Video Camcorder Y P O C Instruction Manual Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, FS22 A/FS21 A/FS20 A/FS200 A systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] ] (High-Speed Continuous Shooting) ( 25) [ SINGLE] Desired option FUNC. CONTINUOUS SHOOTING/ HIGH-SPEED CONTINUOUS SHOOTING 1 Press PHOTO halfway to activate the autofocus. A series of photos will be recorded as long as you hold the button pressed. Maximum number of continuous shots 10 photos 20 photos 3 photos 5 photos LW 1152 x 648, L 1152 x 864 S 640 x 480 These figures are approximate and vary with the recording conditions and subjects. The actual number of frames per second will be lower when the shutter speed is 1/30 or slower. 66 AUTO EXPOSURE BRACKETING Press PHOTO , first halfway to activate the autofocus and then fully to record the photos. Three photos in different exposures will be recorded. Protecting Photos You can protect photos from accidental erasure. Histogram Display When viewing photos you can display the histogram and the icons of all the functions used at the time of recording. Use the histogram as a reference to verify the correct exposure of the photo. The area to the right of the histogram represents highlights and the left side represents shadows. A photo whose histogram skews to the right is relatively bright; while one whose histogram peaks to the left, is relatively dark. Pixel Count NOTES Y P O C ( 25) Protecting Single Photos 1 Open the photo selection screen. Select ( protect. 2 3 ) the photo you want to Press to protect the photo. twice to close the menu. ( 25) 4 Protecting Photos from the Index Screen Options [INDIVIDUAL PHOTOS] Single Photos ( Opens the same screen described in Protecting 67). [SELECTED PHOTOS] Protects all the photos selected in advance (marked with a checkmark). Refer to Pre- Shadows Highlights selecting Recordings from the Index Screen ( 42). The histogram will appear also after recording a photo, while reviewing it within the time set for the [REVIEW] option. ( [REMOVE ALL SELECTIONS] Removes the protection from all photos. 67 Photos FUNC. [ PROTECT] Desired option FUNC. [SELECTED PHOTOS] [YES] [OK] Copies all the photos selected in advance (marked with a checkmark). Refer to Pre- selecting Recordings from the Index Screen IMPORTANT Initializing the recording media ( 32) will permanently erase all recordings, including protected photos. ( 42). / You can copy photos only from the built-in memory to the memory card. Copying Single Photos 1 2 Open in single photo view the photo you want to copy ( 63). twice Copying Photos from the Index Screen Options [ALL PHOTOS] [ONE PHOTO] Copies all the photos. Copies only the photo marked with the orange selection frame. Y P O C / Copying Photos 1 Open the index screen of the photos recorded in the built-in memory. Move the zoom lever toward W and then select the (built-in memory) tab. If you want to copy only one photo, select ( , ) the photo you want to copy. [ COPY] Desired option FUNC. 2 3 [YES]* [OK]** ( 25) * If you selected [SELECTED PHOTOS] or [ALL PHOTOS], you can press to interrupt the operation while it is in progress. **This step is not required when copying a single photo. IMPORTANT Observe the following precautions while the ACCESS indicator is on or flashing. - Do not change the operating mode. NOTES · If there is not enough space on the memory card, the camcorder will copy as many photos as possible before stopping the operation. 68 · If the memory card slot cover is open, or the LOCK switch on the memory card is set to prevent writing, you will not be able to copy photos to the memory card. Other Functions You Can Use When Taking Photos Printing Photos Printing Photos The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order ( 72). You can also use the following functions. . . The following functions and features of the camcorder can be used either for shooting video or for taking photos. The way to set and use them was already explained in detail, so we refer you to the relevant page in the "Video" section. · Zoom ( 35) · Quick Start ( 37) · Recording programs ( 44, 45) · Mini video light ( 47) · Self timer ( 49) · Automatic backlight correction and manual exposure adjustment ( 50) · Manual focus adjustment ( 51) · White balance ( 51) · Image effects ( 52) · Digital effects ( 53) Y P O C Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo. ( 25) Connecting the Camcorder to the Printer 1 2 Turn on the printer. Connect the camcorder to the printer using the supplied USB cable. [. . . ] ("Canon Canada") with respect to Canon Consumer Digital Video Equipment (the "Equipment") purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Equipment to a Canon Service Facility when repairs are required. The Equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada's option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. [. . . ]