User manual CANON FAX-L280

[. . . ] If you have purchased the FAX-L280 model, be sure to read Appendix C before reading the rest of this guide. This equipment conforms with the essential requirements of EC Directive 1999/5/EC. We declare that this product conforms with the EMC requirements of EC Directive 1999/5/EC at nominal mains input 230V, 50Hz although the rated input of the product is 200V-240V, 50/60Hz. (For Europe Only) Model Name · · H12203 (FAX-L200) H12204 (FAX-L280) Copyright Copyrightr 2001 by Canon, Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon, Inc. Trademarks Canon is a registered trademark, and UHQ is a trademark of Canon Inc. [. . . ] . Ex: t t t If you are unsure of the transaction number (TX/RX NO. ), print the DOC. A "#. " before the transaction number (TX/RX NO. ) indicates that that document is being sent at that moment and can therefore not be selected. To continue printing other documents set for delayed sending, repeat the procedure from step 5. -orPress Stop to return to standby mode. 8 Ex: 15:00 FaxOnly 7-16 Sending Faxes Chapter 7 Deleting a Document Set for Delayed Sending Follow this procedure to delete a document stored in memory for delayed sending: Sending Faxes 1 2 3 4 5 Open the one-touch speed dial panel. Use or FILE. . REGISTER DELETE FILE Ex: . to select DELETE Press Set. Use or to select the transaction number (TX/RX NO. ) of the document you want to delete. . TX/RX NO. 0 _001 #. _003 0 Ex: t t t If you are unsure of the transaction number (TX/RX NO. ), print the DOC. A "#. " before the transaction number (TX/RX NO. ) indicates that that document is being sent at that moment. If you want to delete a document being sent, follow the instructions in the LCD. t If you change your mind and want to keep the document in memory for delayed sending, press #. . ERASING END 8 To continue deleting other documents set for delayed sending, repeat the procedure from step 5. -orPress Stop to return to standby mode. 15:00 FaxOnly Chapter 7 Sending Faxes 7-17 Using Alternative Telephone Networks (UK Only) Your FAX has a built-in feature that allows you to send documents and make telephone calls with an alternative long distance service, such as the UK Call, Global Call, and Day Call Services of Cable and Wireless Communications Limited available to users in the UK. Subscribers to such services can save money on most long distance communications. The procedures described in this section show you how to use your FAX with these services of Cable and Wireless Communications Limited. For details on using your FAX with other alternative telephone services, contact your local authorised Canon dealer or the Canon help line. Attaching the M Label If you are using an alternative long distance service, open the one-touch speed dial panel and stick the M label provided with your FAX above the button shown below. This will help you identify the button you need to press when using an alternative telephone network. Data Delayed Registration Transmission Polling Memory Reference Report D. T. Tone/+ Space Clear 7-18 Sending Faxes Chapter 7 Registering an Alternative Telephone Network Follow this procedure to register the access and ID codes under the M button for an alternative telephone network: Sending Faxes 1 2 3 Open the one-touch speed dial panel. Press Set twice. DATA REGSTRATION USER SETTINGS DATE & TIME 4 5 6 7 Use or SETTING. . . to select M-KEY Ex: M-KEY SETTING OFF ON ACCESS CODE Ex: Press Set. Use or to select ON. . . Press Set twice. 132 8 Use or code. . . to select the access t t You can select from the following: · 132 · 131P ("P" indicates a four-second pause. ) The access code you need to select is given to you by Cable and Wireless Communications Limited (or another alternative service). ¶ If you selected 132 in step 8: 9 10 Press Set. Press Stop to return to standby mode. Ex: REPORT SETTINGS 15:00 FaxOnly Chapter 7 Sending Faxes 7-19 ¶ If you selected 131P in step 8: 9 Press Set twice. Ex: ID CODE 10 Use the numeric buttons to enter the ID code (max. t Ex: 123456789 t This ID code is given to you by Cable and Wireless Communications Limited (or another alternative service). If an ID code is already registered, you will see a string on the display. Press Stop to return to standby mode. Ex: REPORT SETTINGS 15:00 FaxOnly Sending With an Alternative Telephone Network Follow this procedure to send using a registered long distance service: 1 Load the document, face down in the ADF ( p. You may be unable to send if the memory used (shown in the LCD) is close to 100%. [. . . ] See also individual menu names accessing 14-3 definition 1-2 system, understanding 14-2, 14-3 Messages. See LCD messages MID PAUSE SET setting 14-6 Mistake, correcting 3-4 M-KEY SETTING 7-19, 14-4 MULTI TX/RX (Transaction) REPORT 11-5 description 11-2 sample 11-5 MULTI TX/RX REPORT. See MULTI TX/RX (Transaction) REPORT Multi-purpose tray 2-9 capacity 5-2 cover 2-2, 2-5, 2-9 N NET SW setting. See NET SWITCH setting NET SWITCH description 8-2 setting 8-12, 8-13, 8-14, 8-15, 14-7 NO RX PAPER message 13-11 NO TEL # message 13-11 NOT AVAILABLE message 13-11 Number entering 3-2, 3-3, 3-4 mode 3-2, 3-3, 3-4 Numeric buttons 2-10, 3-2 I-4 Index O OFFHOOK ALARM setting 14-4 One-touch speed dial panel 2-10 One-touch speed dialling 6-2, 7-4 buttons 2-10, 6-2, 6-16, 6-17 making telephone call with 6-17 registering 6-3 to 6-7 sending with 6-16 Operation panel 2-9, 2-10 Optional handset. [. . . ]