User manual CANON EOS 600D

[. . . ] Before using the camera, be sure to read these Instructions to familiarize yourself with the camera's features and proper operation. Using CF cards made by Canon is recommended. Radio and Television Interference (VCCI Statement) This camera is an information technology device that does not exceed Class B limits for electromagnetic interference (EMI) in compliance with standards set by Japan's Voluntary Control Council for Interference by Information Technology Equipment (VCCI). This device may still cause interference with radio or television reception when placed near such an appliance. Read these Instructions to learn how to avoid reception interference of other appliances. Test the Camera Before Shooting Before using the camera, be sure to test it first. [. . . ] Automatic depth-of-field AE cannot be used if the lens' focus mode switch is set to <MF > (or < M> on older lenses). stands for Auto-Depth of field. 1 2 Set the Mode Dial to < >. Focus the picture. Place an AF point over the subject and press the shutter button down halfway. ( 4 ) The focus will be sharp between the subjects where the AF points flashes in red. You can check the depth of field beforehand while the exposure is displayed. (73) In the example shown on the left, sharp focus will be attained between the left-most person and right-most person. 3 Check the display, then take the picture. If the aperture value is not blinking, the exposure is correct. Press the shutter button down fully. If the aperture value is blinking, the exposure level is correct but the desired depth of field cannot be achieved. If you use a flash, the result will be the same as using < > (Program AE) mode with flash. 76 Setting Exposure Compensation Exposure compensation is used to alter the camera's standard exposure setting to make the picture brighter (increased exposure) or darker (decreased exposure). Exposure compensation can be set up to +/­2 stops, in 1/2-stop increments. 1 2 3 Set the Quick Control Dial switch to <ON >. Focus on the subject, then check the exposure level. Press the shutter button down halfway and check the display. ( 4 ) Set the exposure. While looking at the LCD panel or viewfinder, turn the < > dial. Turn the < > dial while pressing the shutter button down halfway, or within ( 4 ) seconds of pressing the shutter button down halfway. (133) 1 2 Focus on the point on which you want to lock the exposure reading. The exposure value is displayed in the viewfinder. Press the < > button. The < > icon lights in the viewfinder to indicate that the exposure setting is locked. ( 4) Each time you press the < > button, the current exposure setting is locked. 3 Compose the shot and take the picture. You can apply AE lock by pressing the shutter button (instead of the < down halfway, and focus with the < > button. (C. Fn-2-1122) > button) 80 Self-timer Operation The self-timer is convenient for group photographs. We recommend using a tripod when you use the self-timer. 1 Select the self-timer. Press the < DRIVE> button ( 6 ), and turn the < > dial to select < >. 2 3 Focus on the subject. Make sure the focus confirmation light < > and the exposure setting are displayed. 3 Advanced Operations Take the picture. Press the shutter button down fully. The beeper sounds as the red-eye reduction lamp operates, and the picture is taken after 10 seconds. To cancel the self-timer, press the < DRIVE> button. Do not stand in front of the camera when you press the shutter button to start the self-timer. You can set the beep that indicates the subject is in focus and the beep that indicates the self-timer is operating to [On ] or [ Off]. (118) When using the self-timer to shoot only yourself, lock the focus (58) on an object at about the same distance as where you will be. You can use the Remote Switch RS-80N3 (optional) or Timer Remote Controller TC-80N3 (optional) to take a picture when you are away from the camera. 81 Self-timer Operation Using the Eyepiece Cover If you take a picture using the self-timer or remote switch (optional) without looking through the viewfinder, stray light can enter the eyepiece and affect the exposure. To prevent this, attach the eyepiece cover to the viewfinder eyepiece before taking the picture. 1 2 Remove the eyecup. Grasp both sides of the eyecup and lift it up and away from the camera. Slip the eyepiece cover over the eyepiece. The eyepiece cover is attached to the strap. 82 Bulb Exposures In a bulb exposure, the shutter remains open as long as you hold the shutter button down, and closes when you release it. Bulb exposures are useful for the long exposures required for night scenes, fireworks, etc. 1 2 3 4 Set the Mode Dial to < >. [. . . ] 100 (W) × 51 (H) × 133 (D) mm (3. 94 × 2. 0 × 5. 24 in) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 g (10. 1 oz) (excluding power cord) · Compact Power Adapter CA-PS400 7 Compatible adapter . . . . . . . . . . . . . . . . . . Compact Power Adapter Canon-PS400 Compatible camera . . . . . . . . . . . . . . . . . . 38. 4 (W) × 21 (H) × 55. 3 (D) mm (1. 51 × 0. 83 × 2. 18 in) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]