User manual CANDY HDPN1L360OW

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. We recommend you always keep this manual to hand and in good condition for any future owner. Please check that the appliance is delivered with this instruction manual, the warranty certificate, the service centre address and the energy efficiency label. [. . . ] If the machine is left in places where the temperature is below 0°C any water left inside the pipes may freeze. Wait until the temperature rises above zero and then wait for about 24 hours before. A ON/OFF button B "PROGRAMME SELECTION" button/ENROLMENT Wi-Fi C "SMART DOOR" option button D C+E CHILD LOCK E "DELAY START" button F Reset" button for "SALT EMPTY" light G "START/RESET" button H "SALT EMPTY" light I "PROGRAMME STATUS" lights/"DELAY START" time lights L "SMART DOOR" light M "PROGRAMME SELECTION" light N "ADDISH" light Place settings (EN 50242) Capacity with pans and dishes Water supply pressure (MPa) PROGRAMME SELECTION Next time you switch on the AND SPECIAL FEATURES appliance L To turn the appliance on and off, press the ON/OFF button (for at least 3 seconds). At the end of the cycle, remember to switch off the appliance using the ON/OFF button, then remove the plug and close the water supply. To turn the machine on, and the "P3"programme indicator light will come on. If you have turned on the programme memorisation function, the indicator light corresponding to the last programme completed will appear on the display. First time you switch on the appliance L Connect the machine to the power supply. L Open the door, put the dishes to be washed inside, and close the door again. L At this time only the "ON/OFF" and "PROGRAMME SELECTION" buttons will be active, and all the programme indicator lights will come on for 3 sec. After this only indicator light "P3" will stay on, and all the buttons will still be active. l Choose a programme with the "PROGRAMME SELECTION" button. L If you wish to select an option, press the corresponding button (the indicator light representing the selected option will come on). L Press "START/RESET" and a signal will sound, the indicator light corresponding to the selected programme will stay on and the wash indicator light will come on. If the programme is started with the door open, a signal will sound 5 times, and the programme will be started automatically once the door has been closed. From the Settings menu, you can adjust various parameters to suit your washing requirements. Entering the Settings menu l Turn on the dishwasher by holding the "ON/OFF" button down for about 3 sec. L Hold down the "PROGRAMME SELECTION" and "ON/OFF" buttons for about 5 sec. l The settings will be displayed: - Lime scale prevention settings appear when the indicator light comes on in the corresponding programmes. - When the audio signal is activated, the "EXPRESS" indicator light comes on. - When the "Memo" function is activated, the "6h" indicator light on the "DELAY START" function comes on. L When you press the "PROGRAMME SELECTION" button, adjustment of SOFTENER will begin (refer to the appropriate chapter in the instruction booklet for information). L Press the "EXPRESS" button to turn on adjustment of the BUZZER. [. . . ] In this case, turn the dishwasher off by pressing the "ON/OFF" button. After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again. This dishwasher is equipped with an overflow safety device that, in the event of a problem, automatically discharges any excess water. To ensure the correct operation of the overflow safety device, we recommend not moving or tilting the dishwasher during operation. [. . . ]