User manual BUICK RENDEZVOUS GTK 2004

[. . . ] Please read this information and your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may not include all the features described in this booklet. Place this booklet in your Owner Manual portfolio for easy reference. Instrument Panel . . 20 2 Instrument Panel Getting to Know Your 2004 Rendezvous A. [. . . ] A second driver can store his or her settings by repeating the process and pressing memory button #2 for more than three seconds. To store an exit position, press memory button #1 or #2 (whichever driver number is yours), then adjust the seat to a desired exit position. Then press the exit button below the numbered memory buttons for more than three seconds. To recall the exit position, the shift lever must be in the PARK (P) position. Press the exit button and the seat will move to the stored exit position. To link seat and mirror memory settings to the Remote Keyless Entry System transmitter through the DIC, enter programming mode (see DIC section of this guide), press the MODE button until Heated Seats (Optional): The buttons to control this feature are located on the instrument panel switchbank. The left switch is for the driver seat and the right switch is for the front passenger seat. Press the top of the switch to turn the heater on and the bottom of the switch to turn if off. The switch will turn off when the ignition is turned to OFF, and if left in the ON position, will turn on when the vehicle is restarted. Note: This heated seat feature does not shut off automatically once the seat(s) are warmed. It must be turned off manually. 11 Second-Row Folding Seat: To fold the seat forward, lift up or push forward on the recliner lever located on the outboard side of the seat back. When folding the second-row seat forward, ensure that the center head restraint is placed in its lowest position to prevent contact with the front floor console storage area. Third-Row Stowable Seat (Optional): To fold the seatback down, pull up on the latch at the rear of the seat and push the seatback down until it locks in place. To raise it, pull up on the same lever and push up on the seatback to raise it. This can be done through the passenger door, and to accomplish this from the back of the vehicle, a strap is included to pull up on the seatback. To remove the stowable seat, consult the Owner Manual. See Section 1 of your Owner Manual. Outside Rearview Mirrors Memory Mirrors (Optional): Personalized mirror positions are programmed into memory at the same time the memory seats are programmed. See the Seats section of this guide to program mirror positions into memory. Outside Heated (Optional): When you turn on the rear window defogger, a defogger also warms the outside mirrors to clear them of mist, ice and snow. See Sections 2 and 3 of your Owner Manual. Opening the Vehicle Hood To open the hood, pull the hood release handle located under the driver's side of the instrument panel. Under the leading edge of the hood itself, slide the secondary hood release handle from left to right and lift the hood. Position the prop rod in its slot on the underside of the hood as applicable. See Section 5 of your Owner Manual. 12 Getting to Know Your 2004 Rendezvous 4. If an alternate station within that category is preferred and the category is displayed, press either SEEK arrow once. If the category is still not displayed, press either SEEK arrow twice to display the category and go to another station. See Section 3 of your Owner Manual for additional RDS and PTY information. [. . . ] The Remote Keyless Entry System transmitter will also unlock and open the liftgate when the REAR button on the transmitter is pressed. To open the liftgate, all doors must be unlocked and the shift lever must be in the PARK (P) position. See Section 2 of your Owner Manual. Rear Door Security Locks Your vehicle is equipped with the Lower Anchorages and Top Tethers for CHildren (LATCH) system, which requires a special, compatible Child Restraint Seat. Lower LATCH anchors are located in the outboard positions of the second-row seat. A label (shown) is applied to the seatback at each anchor position to help you find the lower anchors. [. . . ]