User manual BOSCH TAS 5546EE/05 SHORT INSTRUCTIONS

[. . . ] This appliance is for household use only, to prepare espresso, cappuccino and coffee. The manufacturer cannot be held responsible for damage caused by improper use of the appliance. Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. [. . . ] They allow for independent preparation of froth/cappuccino or espresso/coffee. The second heating system can be turned off to save energy during the heating phase e. g. When the steam system is turned off and froth or cappuccino is selected, the unit must heat up first to produce steam. As long as the coffee system was not completely turned off, the steam system is on. ^ Select "On" or "Off" and then "OK" to save the setting. Lighting Lighting sets the type of light used when the appliance is turned on. The lighting can be turned on/off automatically or dimmed to the desired brightness. The dimming functions can be set independently for the upper or lower lighting. , Caution!Do not look directly or with an optical instrument into the lighting. To change the lighting ^ Select "Settings" and then "more". On during use On: The lighting turns on and off when the unit is turned on and off. Dimming The brightness of the upper and lower lighting can be set independently of each other. ^ Select from: Never: The unit keeps the once selected user profile until another user profile is selected. At turning on: Every time the coffee maker is turned on, it selects automatically the standard user profile, regardless which user profile was last selected. After servings: After each dispensing of a drink the unit switches automatically back to the standard profile. Selecting a user profile ^ Select "User profile - Standard" and then the desired profile. The "Standard" profile has standard settings. 31 Settings Display The display contrast and brightness can be adjusted. ^ Select "Settings" and then select "more" three times. SETTINGS + back + DISPLAY + TONE OPTIONS PLUMBED . . . ~ RESET ~ + back + DISPLAY + TONE OPTIONS Tone options A tone can be selected to confirm the selection of a touch control. ^ Select "Settings" and then "more" three times. SETTINGS PLUMBED . . . ^ Select "Contrast" or "Brightness" and then the setting. ^ Select "OK" to save the selection. ^ Select "Tone options". To turn the tone on or off ^ Select "Keypad tone" until the desired option is highlighted. ^ Confirm the selection with "OK". 32 Settings Reset To select the factory defaults select in the submenu to "Reset all" (all settings back to default: timer, rinse automatic, steam system, lighting, System Lock, water hardness, display, last selected coffee type and all standard profile settings), or the "User profiles". [. . . ] ­ If the message still appears contact Technical Service. F 73 shows The brew unit is clogged and cannot ­ Select "Clear". ­ If the message still shows contact Technical Service. 53 After sales service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the contact information on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance. MieleCare MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. [. . . ]