User manual BEKO 32WLU530HID

[. . . ] INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 32WLU530HID Operating Instructions TABLE OF CONTENTS 1 1. 1-Cleaning the screen and cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2-Disposing of your TV at the end of service life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 3-Superior features of your integrated digital television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 4-Receiving digital broadcasting channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 5-Changing the plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. 1-Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4. 1-Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. 2-Powering on your TV and the initial use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. 3-Performing initial start and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. 4-Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. 1-TV Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5. 2-Rear and Side External Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5. 3-Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 4 2-Features of your new television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After setting is complete, press the EXIT button to exit the menu. 6. 6. 5-Lockingastoredchannel For this feature, please see page. 21-22 7. 5-Parental Control 15 6. 6. 8-Channel List If you press OK button when no menu is open, Channel List menu will be displayed on the screen. Note: Signal Information menu will be active only for Digital broadcasts. 6. 8-CA Module (Conditional Access) CHANNEL LST Channel 1 Channel 2 Channel 3 Channel 4 In this menu, you can check the CA Module settings. If a CI module is inserted for a channel that has a scrambled broadcast, then a submenu for that module is opened and the information for that module is updated. 6. 9-Active Antenna Power When this feature is set to On, you can connect an external antenna to your television without needing any external source. Scroll to the Active Antenna Power tab by pressing the down movement button in the Channel Setup menu and select On by pressing the Right/Left movement buttons. Select Exit You can see all the channels of the current mode while you are in the Channel List menu, you can select the desired channel with Up/Down buttons and view it by pressing the OK button. 6. 7-Signal Information This menu gives information about Channel, Network, Modulation, Signal level and quality. Select Channel Setup menu by pressing the Right/Left movement buttons. Select Signal Information tab by pressing the Down movement button and confirm with Right movement button or OK button. Signal Information menu will be displayed. Signal Information Channel Network Modulation Quality 23 XX Network 2X 64XXX X2/3 60% 90% Exit 490 Mhz Signal Strength 16 7 The settings on your new television 7. 1-Performing the Sound settings You may perform Volume settings by using the V+ or V- buttons on your television or the VOL+/VOL- buttons on your remote control. To do this, press the MENU button on your remote control, select SOUND menu by pressing the Right/ Left movement buttons and press the OK button. In this menu, you can select one of the titles for which you would like to perform an operation. 7. 1. 3-Sound Type The program you watch may be broadcast in stereo or in two different languages. Using the Right/Left movement buttons in this menu, you can select Mono/Stereo or Dual-1/ Dual-2. 7. 1. 4-Sound Mode If you would like to add some depth to the sound of the program you are watching, press Right/Left movement buttons to select Normal or Spatial feature. 7. 1. 5-Equalizer Select the EQUALIZER tab in the Sound menu and confirm with the OK button. The Equalizer menu is displayed. SOUND Volume Balance AVL Sound Type Sound Mode Equalizer Headphone Off L+R Normal EQUALIZER < User < Select Back Exit Select Back Exit 7. 1. 1-Balance To adjust the sound balance between the right and left loudspeakers to the desired level, select the Balance tab in the volume menu by using the Down movement button. Using the Left/Right movement buttons adjust this option to the desired level. 7. 1. 2-AVL (Automatic Volume Limiting) Television transmitters have different sound levels. This can be noticed from the different volume levels that can be heard while switching from one program to another. The AVL (Automatic Volume Limiting) function maintains the same sound level as you switch from program to program. Select Off to cancel it. Using the Right/Left movement buttons, you may select either one of the preset Music, Sports, Cinema and Speech options which enhance the sound effect depending on the feature of the program you are watching or the User option which you can adjust as you desire. You can adjust the frequency levels with the Up/ Down movement buttons. You can select one of the 120Hz, 500Hz, 1. 5kHz, 5kHz and 10kHz frequency bands with Right and Left movement buttons. Note: You can select the equalizer options directly by pressing the ( ) button on your remote control. 17 7. 1. 6-Headphone By connecting headphones to your television you can listen to the program sounds independently from your television. To turn up and down the headphone volume level, select Headphone tab from the Sound menu and adjust the volume level by using the Right/Left movement buttons. Note 1: The settings you have made in the Sound menu will be stored in the memory without requiring any other operations. Note 2: When you want to hear the sound from the headphone only, just press the MUTE button on your remote control. the Advanced Picture Settings menu. The changes you have made in the PICTURE menu will be stored in the memory without requiring any other operation. 7. 2. 2-Picture Mode You can select either one of the four non-adjustable settings in the memory or one of the user options by pressing the ( ) button on your remote control. [. . . ] Poor picture quality Antenna may be affected by two connected external devices. Broadcast system setting (if setting choice is available) Problem in channel broadcasting. No or defective teletext Television channel (no teletext) or antenna system. Very weak signal Temporary sound mute may be on No sound Is the sound turned down? [. . . ]