User manual ALLEN & HEATH XONE BROCHURE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALLEN & HEATH XONE. We hope that this ALLEN & HEATH XONE user guide will be useful to you.
Manual abstract: user guide ALLEN & HEATH XONEBROCHURE
Detailed instructions for use are in the User's Guide.
[. . . ] The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by ALLEN & HEATH. Any necessary adjustment, alteration or repair has been carried out by ALLEN & HEATH or its authorised agent. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase. Check with your ALLEN & HEATH agent for any additional warranty which may apply.
This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC and the European Low Voltage Directives 73/23/EEC & 93/68/EEC. [. . . ] If you wish to cue the sampler effect before raising the source fader into the mix then set it pre-fade. Use the sampler return channel fader to bring up or remove the effect from the mix.
You can use the Aux mix to cue your music when beat or cut mixing. Set all sends pre-fade and select the headphones monitor AUX switch to listen to the selected channels. This lets you listen to the effect of mixing the sources or matching the beat before you bring it into the house mix.
20
XONE:92 User Guide
3 PHONO/LINE switch. In the up position the switch selects the PHONO input, indicated by the green led. This input provides standard RIAA equalisation for high quality magnetic cartridge turntables. When pressed, LINE is selected, indicated by the led changing colour to red. Adjusts the input sensitivity of the channel to match the connected source to the console 0dB operating level. This provides a 20dB range with continuous adjustment for line level signals from 10dBu to +10dBu. Stereo Channels 1 to 4 feature a unique four band equaliser providing infinite attenuation of high and low frequencies and -30dB attenuation of mid frequencies. This provides the DJ with effective equalisation to creatively alter and shape the sound during live performance rather than simply correct source problems. Press this switch to listen to the pre-fader channel signal in the headphones and to display its signal on the main meters. This does not affect the house mix or booth speakers and lets you audition the signal to cue a track before adding it to the mix. Cue is typically pre-EQ for music channels so that you do not lose your reference when beat mixing, regardless of the EQ effect, but can be selected to be post EQ by selecting the POST EQ switch in the master section. The CUE light-pipe illuminates so that you can see at a glance which channel is cued. Multiple cues can be selected by pressing two or more together, but make sure all cues are OFF first.
9 Channel meter. A 9 led meter bar always shows the presence of the pre-fader channel signal. Adjust the LEVEL control for normal music averaging 0dB with loudest moments reaching +6. A 60mm linear or rotary stereo VCA fader adjusts the signal level from off to the normal top position. This allows smooth fade ins and a visual indication of its contribution to the mix. The fader does not affect the pre-fade Aux sends.
21
Crossfader and VCF
The crossfader is applied to the stereo music channels and lets you smoothly fade from one track into another using a single fader. It is also used as a creative performance tool to layer or interact between two sounds when cut or scratch mixing . [. . . ] XLR The professional standard 3 pin round connector used for microphone and other balanced connections. 33
Specifications
0dBu = 0. 775 Volts rms, +4dBu = 1. 23V rms Max output level MIX 1 MIX 2 AUX REC Internal headroom Freq response Distortion Crosstalk MIC EIN 22-22kHz Residual noise 0dBV = 1 Volt rms, -10dBV = 316mV rms Main meters Mic EQ Music EQ Peak reading 9 led -20 to +10 4-Band +/-15dB 100, 250, 2. 5k, 10kHz 4-Band +6dB / -30 (Mids) Infinity (12dB/Oct) LF/HF 250, 350, 2k, 2. 5K Ch fader 60mm stereo or rotary VCA
+22dBu into 47 ohm +20dBu into 47 ohm +21dBu into 47 ohm +11dBV into 600 ohm +22dB 5Hz to 30kHz
Channels +/-0. 5dB
< 0. 003% THD+noise @1kHz > -93dB Inter-channel -126dB 150 ohm source MIX 1 MIX 2 AUX REC -99dBu -106dBu -90dBu -96dBu -88dBu (-90dB S/N) -90dBu (-88dB S/N) -88dBu (-86dB S/N) -96dBu Filters Panel PSU Mains In Power Lead AC mains Consumption Fuse rating
Mix 1 & 2 faders Rotary Crossfader 45mm stereo VCA Replaceable Dual stereo VCF Analogue Steel Internal switch mode 3 pin IEC socket Country dependant 110 to 240V AC @ 47/63Hz 30W max 100-240V AC T500mAL
BOOTH -106dBu Mix noise MIX 1 MIX 2 AUX REC Channel meters
BOOTH -89dBu (-87dB S/N) Peak reading 9 led -20 to +10
Dimensions and Weights
The console is fitted with rubber feet for desktop operation. Width Desktop Rack ears fitted (1) Rack ears fitted (2) Packed 320 mm (12. 6") 370 mm (14. 6") 482 mm (19") 470 mm (18. 5") Height 87. 6 mm (3. 5") 87. 6 mm (3. 5") 87. 6 mm (3. 5") 210 mm (8. 3") Depth 358 mm (14") 358 mm (14") 358 mm (14") 400 mm (15. 7") 8 kg (18 lbs) Weight 6 kg (13 lbs)
Rack Ears
Allow permanent fixing in a plinth or rack system. Fix in place using M6 screws or bolts.
11 348 rack ear fixings 8. 40 465. 2 rack ear fixings
Rack ear fixings 117
87. 60
320 370 with rack ears fitted 482 with rack ears fitted
34
37. 30 101. 60
120
76. 20
101. 60
358. 00
XONE:92 User Guide
XONE:92
BLOCK DIAGRAM
CUE
PRE-EQ POST-EQ PRE/POST EQ SELECT
CUE MIX CUE POST DC CUE LOGIC DC AUX 1 MIX AUX 2 MIX FILTER 1 MIX FILTER 2 MIX XFADE X/Y DC CLEANFEED MIX LR MIX
XFADE CURVE
CROSSFADER Y
FILTER 2 MIX
MIDI OUT
X
FILTER 1 MIX
XFADER - CC92
FADER
FILTER 1
LFO DEPTH
FILTER 2
LFO DEPTH
TEMPO DATA
MIDI
TEMPO/DATA TEMPO ADJUST MIDI DATA - CC94 START/STOP START/STOP-REWIND
STEREO INPUTS 1, 2, 3, 4
4 BAND EQ LEVEL PHONO LR RIAA
MID2
METER
+
X Y ON X2 TAP RESONANCE
LIMIT MAX RES LIMIT MAX RES
ON X2 TAP RESONANCE
HI DC MID1
OFF XFADE SELECT
PHONO/LINE
GN = PHONO RED = LINE
+
VCF2 TAP TEMPO MIDI CLOCK
VCA LINE LR
RIAA DISABLE +10dB GAIN DISABLE
DC
LO
2 OFF FILTER SELECT PRE AUX1
1
VCF to XFADER HPF BPF LPF
VCF to XFADER HPF BPF
VCF1 FREQ - CC12 VCF2 FREQ - CC13
MIDI OUTPUT CONFIGURE LPF VCF LINK 2-1 FREQ ON OFF VCF1 VCF2 XFADER MIDI CH ON
2=+ L
PRE
AUX2 FREQ
CH16 CH15
FILTER DISABLE
ON
FILTER DISABLE
CUE
MIC/RTN INPUTS 1, 2
4 BAND EQ LEVEL MIC
2= + + GN = CH ON RED = PEAK
-15dB DUCKING
CLEANFEED MIX
LR+CF
MUSIC+MIC
MIX 1
BAL 2=+ 0dBu
MIX 1 OUT
R
+
LR MIX
FADER
MOMENTARY
CLEANFEED CONTROL
MIC = CLEANFEED ENABLED RTN = CLEANFEED DISABLED
MUSIC ONLY
MIX
MIX 1 L
-2dBu
HI MID1 MID2
MIC/RTN
GN = MIC RED = RTN
+
DUCK OFF ON
LATCHED CLEANFEED DISABLE
RECORD OUT
L -10dBV R
MIX 2 OUT
R
STEREO RTN L/M R
LO
BOOTH
MONO MUTE BOOTH
-2dBu
L
PRE
AUX1
BOOTH OUT
R
PRE
AUX2
AUX 1 MIX -2dBu
L
LR SUM
CUE ACTIVE
ADD MIX
AUX 1 OUT
R
+
AUX 1 AUX 2
L
HEADPHONES
PHONES 1/4"
L R
AUX
R AUX 2 MIX -2dBu
+
L
PHONES 3. 5mm
AUX 2 OUT
R
SPLIT CUE
POST-EQ
CUE MIX CUE LOGIC DC CUE PRG - SPLIT
LR
METER
Connector Types
XLR male and female connectors : TRS input and output connectors : RCA PHONO pin connectors DIN 5 pin male MIDI connectors Standard MIDI cable Type Balanced XLR female Unbalanced TRS jack RCA phono RIAA RCA phono Type Servo Balanced XLR male Impedance balanced TRS jack RCA phono Impedance balanced TRS jack Impedance balanced TRS jack ¼" and 3. 5mm, Tip = L Ring = R Impedance <2k ohm 6k ohm 47kohm/330pF >20k ohm Sensitivity -47 to 10dBu -15 to +20dBu 3 to 100mV -10 to +20dBu Nominal Level 0dBu -2dBu -10dBV -2dBu -2dBu Pin 2 = hot (+) Pin 3 = cold (-) Pin 1 = GND Tip = hot (+) Ring = cold (-) Sleeve = GND
Input Connections
CH1, 2 IN (Mic) (Stereo Return) CH1, 2, 3, 4 (Phono) (Stereo Line)
Output Connections
MIX OUT 1 L, R (XLR) MIX OUT 2 L, R (jack) RECORD OUT AUX OUT 1 & 2 L, R BOOTH OUT HEADPHONES
Impedance 47 ohm 47 ohm 600 ohm 47 ohm 47 ohm
30 to 600 ohm recommended
XONE:92 User Guide
35
Installer Link Options
CAUTION : The following service instructions are for use by qualified personnel only. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALLEN & HEATH XONE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALLEN & HEATH XONE will begin.