User manual AEG-ELECTROLUX SBE 630 R SUPERTORQUE

[. . . ] in case of deviating mains voltage , the data stated on the rating plate are applicable. [. . . ] Always use the auxiliary handle, even if the machine has a safety clutch since this safety clutch only engages when the machine blocks with a jerk. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 50144, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance with the regulations 98/37/EC, 73/23/EEC, 89/336/EEC MAINS CONNECTION Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. If the machine is mainly used for percussion drilling, regularly remove collected dust from the chuck. To remove the dust hold the machine with the chuck facing down vertically, and completely open and close the chuck. [. . . ] Bestämmelser och riktlinjerna 98/37/EG, 73/23/EWG, 89/336/EWG NÄTANSLUTNING Endast till enfas-växelström och endast till den nätspänning som finns angiven på effektskylten. [. . . ]