User manual AEG-ELECTROLUX S63800KMW0

[. . . ] Children should be supervised to ensure that they do not play with the appliance. â· If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it. â· If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. â· The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet. [. . . ] When the cooling is finished return the air lever (1) towards minimum. This function allows you to keep the refrigerator closed and empty during a long holiday period without the formation of a bad smell. The function switches off by selecting a different fridge set temperature. An acoustic alarm will sound if the door is left open for a few minutes. During the alarm, the buzzer can be switched off by pressing any button. Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. In accordance with regulations valid in this country it must be provided with a special device (see figure) placed in the lower compartment of the fridge to indicate the coldest zone of it. Your appliance is equipped with a carbon filter behind the air lever flap. The filter purifies the air from unwanted odours in the fridge compartment preserving food quality. Make sure that the air lever flap is closed to obtain proper function. The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. To permit storage of food packages of various sizes, the door shelves can be placed at different heights. This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this result, pull the shelf up so it can rotate upwards and be placed on the next higher level. Bottle and can holder The side of the bottle and can holder is moveable to enable a more flexible placement of cans and bottles in front of the grid. To allow the holder to be moved easier when moving sideways, press the shelf backwards. Helpful hints and tips The bottle support can be pulled out when chilling larger bottles. To maintain the best performance the shelf should be placed in the second groove from the top. Do not open the door frequently or leave it open longer than absolutely necessary. â· If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption. [. . . ] Before carrying out any operations, remove the plug from the power socket. To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the door of the appliance during the operations. Take from the accessory bag the two plugs and cover the holes left open after having removed the handle. Make sure that the front board of the door is parallel to the front board of the top. [. . . ]