User manual AEG-ELECTROLUX RF594

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX RF594. We hope that this AEG-ELECTROLUX RF594 user guide will be useful to you.


AEG-ELECTROLUX RF594 : Download the complete user guide (360 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX RF594 (298 ko)
   AEG-ELECTROLUX RF594 (241 ko)

Manual abstract: user guide AEG-ELECTROLUX RF594

Detailed instructions for use are in the User's Guide.

[. . . ] Water connection • Make sure not to cause damage to the water hoses. €¢ Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. €¢ The first time you use the appliance, make sure that there is no leakage. €¢ The water inlet hose has a safety valve and a sheath with an inner mains cable. [. . . ] This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. 2 11 - 12 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. OPTIONS Activate or deactivate the options before the start of a programme. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. 1 Energy Saver This option decreases the temperature in the last rinse phase. The use of this option decreases the energy consumption (up to 25%) and the programme duration. €¢ If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. By default, the acoustic signals are on, but it is possible to deactivate them. Make sure that the appliance is in setting mode, refer to ‘Setting and starting a programme’. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). Make sure that the appliance is in setting mode, refer to ’Setting and starting a programme’. €¢ If the rinse aid indicator is on, fill the rinse aid dispenser. €¢ If you use the combi detergent tablets, activate the Multitab option. Set and start the correct programme for the type of load and the degree of soil. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. The appliance is in setting mode when the display shows 2 horizontal status bars. Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. Make sure that there is detergent in the detergent dispenser before you start a new programme. At the end of the programme The display shows 0:00 and the end indicator comes on. [. . . ] 1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes • The released quantity of rinse aid is too much. ENGLISH 67 Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. Dishes are wet • The programme is without a drying phase or with a low temperature drying phase. €¢ The quality of the combi detergent tablets can be the cause. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX RF594




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX RF594 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.