User manual AEG-ELECTROLUX LN88670

[. . . ] The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. [. . . ] ⷠMeat and fish do not need to be completely thawed before cooking. See the following chart for defrosting times and temperature levels: FOOD Weight Bread Cake Fish Fish Chicken Chicken Rib steak Minced meat Minced meat 1/2 Kg 1/2 Kg 1/2 Kg 1 Kg LO LEVEL Time 35 min 25 min 30 min 40 min 1 Kg 1, 5 Kg 1/2 Kg 1/2 Kg 1 Kg 75 min 90 min 40 min 60 min 120 min Weight HI LEVEL Time Carefully read this Instruction Manual to achieve the best results from your oven. Due to the manufacturing process there may be residues of grease and other substances. To cool the oven open the door to allow ventilation and odours to escape from inside. During the first use, fumes and odours may occur and the kitchen should therefore be well ventilated. In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset. To operate, simply touch the glass control symbols with your fingertip. the touch control sensitivity continuously adapts to changing conditions. Ensure that the glass front of the control panel is clean and free of any obstacles when turning on the oven. If the clock does not respond correctly when you touch the glass, you will need to turn off the oven for a few seconds and then turn it back on. You can use this function even if you are already cooking with the oven. 8 The oven will remain off, with the symbol lit and the symbol flashing slowly. The clock will show the current time and the inside light will remain off. 10 Once the set time is reached, the oven will turn off, an alarm will sound and the and symbols will flash. If you wish to change the cooking stop time while cooking is in progress, press on the clock button until the symbol flashes. The two beeps you hear after that will confirm the new time has been set. A beep will go sound when the set time has finished, whether the oven is on or off. 2 Select the length of time after which you want the alarm to sound by pressing on the buttons. 3 You will then hear two beeps; the display will show the time left before the alarm sounds and the symbol will flash slowly, indicating that the timer has been set. 4 Once the programmed time has passed, an alarm will sound and the symbol will begin to flash more quickly. You can change the programmed time whenever you want by touching the minute minder button until the symbol flashes, and then touching the buttons. [. . . ] ⷠYou can now clean the inside of the oven · Make sure at the end to dry all the inside and the surround of the appliance, particularly the door seals. Before carrying out any work, the appliance must be disconnected from the mains electricity supply. The inside of the oven should be cleaned to remove food and grease deposits, which can give off smoke or odours and cause stains to appear. The floor of the oven) use a nylon brush or sponge with warm soapy water. [. . . ]