User manual AEG-ELECTROLUX L84950A3

[. . . ] LAVAMAT 84950 A3 User manual Washing machine 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] load 8 kg Maximum spin speed at 1400 rpm The washing programme for white cottons. This program eliminates the micro-organisms thanks to the washing by 60°C and an additional rinse. Put into the compartment Stain a special additive for hygiene and select the option Stain. Options Detergent Compartment SPIN REDUCTION NIGHT CYCLE RINSE HOLD - PREWASH - STAIN - EXTRA RINSE - SENSITIVE - TIME SAVING 1) SPIN REDUCTION RINSE HOLD - PREWASH - STAIN SPIN REDUCTION 40- 60 MIX NIGHT CYCLE 40° RINSE HOLD - PREMain wash - Rinses - Long spin WASH - STAIN - SENMax. load 8 kg SITIVE - EXTRA RINSE Maximum spin speed at 1400 rpm White and coloured cotton This programme can be used for laundry, which should be washed at 40°C or 60°C separately. The maximum load capacity can be put into the drum in order to save energy and water. The same good washing result will be obtained as for normal programme at 60°C. load 8 kg Maximum spin speed at 1200 rpm With this programme it is possible to wash items like pants, shirts or jackets in Jeans and also jersey realized with hi-tech materials. SPIN REDUCTION NIGHT CYCLE RINSE HOLD - PREWASH Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry SYNTHETICS 60°- Cold Main wash - Rinses - Short spin Max. load 4 kg - Reduced load 2 kg Maximum spin speed at 1200 rpm Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. 19 Options Detergent Compartment SPIN REDUCTION NIGHT CYCLE RINSE HOLD - PREWASH - STAIN - EXTRA RINSE - SENSITIVE - TIME SAVING ) SPIN REDUCTION EASY IRON RINSE HOLD - PRE60°- Cold WASH - EXTRA RINSE Main wash - Rinses - Short spin Max. load 4 kg Maximum spin speed at 1200 rpm Synthetic fabrics to be gentle washed and spun. Selecting this programme the laundry is gently washed and spun to avoid any creasing. load kg 4 - Reduced load 2 kg Maximum spin speed at 1200 rpm Delicate fabrics: acrylics, viscose, polyester. load kg 2. 5 Maximum spin speed at 800 rpm Special programme for a single synthetic blanket, duvet, bedspread and so on. load 4 kg Maximum spin speed at 1200 rpm With this programme it is possible to rinse and spin cotton garments which have been washed by hand. DRAIN Draining of water For emptying out the water of the last rinse in programmes with the Rinse Hold option selected. SPIN REDUCTION NIGHT CYCLE RINSE HOLD - PREWASH - STAIN - EXTRA RINSE - TIME SAVING ) SPIN REDUCTION SPIN REDUCTION NIGHT CYCLE RINSE HOLD - EXTRA RINSE 20 Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry SPIN Drain and long spin Max. load 8 kg Maximum spin speed at 1400 rpm Separate spin for hand washed cotton garments and after programmes with the Rinse Hold option selected. You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun. load for silk: 1 kg Maximum spin speed at 1200 rpm Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics. If the appliance doesn't perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme. load 1 kg Maximum spin speed at 1200 rpm This programme is suitable for very delicate items, as lingerie, bras and underwear etc. [. . . ] Angle the hose to the left or right depending on the position of your water tap. 3. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. Installation should comply with local water authority and building regulations requirements. [. . . ]