User manual AEG-ELECTROLUX FSE63617P

[. . . ] We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. visit our website to: Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. [. . . ] The appliance returns to the programme The saved settings remain valid until you Use rough salt designed for dishwashers only. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. Carefully shake the funnel by its handle to get the last granules inside. Turn the cap of the salt container clockwise to close the salt container. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Close the water tap when the Only use rinse aid designed specifically for dishwashers. Fill the dispenser (B) until the rinse Remove the spilled rinse aid with an Make sure that the lid locks into position. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. Slide your finger across MY TIME selection bar to choose a suitable programme. The ECOMETER indicates the updated level of energy and water consumption. By default, options must be activated every time before you start a programme. If the latest programme selection is enabled, the saved options are activated automatically along with the programme. It is not possible to activate or deactivate options while a programme is running. Activating options often increases the water and energy consumption as well as the programme duration. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). Close the appliance door to start the During the countdown, it is not possible to change the delay time and the programme selection. 6 How to cancel the delay start while the countdown operates press and hold for about 3 seconds. If you cancel the delay start, you have to select the programme again. Make sure that there is detergent in the detergent dispenser before you start a new programme. 8 Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. [. . . ] Before checking the PNC, make sure the appliance is in the programme selection. The display shows the PNC of your The appliance returns to the programme selection. If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. Activate the ExtraPower option to improve the washing Tableware was left for too long inside the closed appli- ance. [. . . ]