User manual AEG-ELECTROLUX FSE62700P

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX FSE62700P. We hope that this AEG-ELECTROLUX FSE62700P user guide will be useful to you.


AEG-ELECTROLUX FSE62700P : Download the complete user guide (2114 Ko)

Manual abstract: user guide AEG-ELECTROLUX FSE62700P

Detailed instructions for use are in the User's Guide.

[. . . ] U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. €¢ Kies een programma volgens het type vaat en de mate van vervuiling. €¢ Het programma geschikt is voor het type lading en de mate van bevuiling. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. [. . . ] by default , TimeSaver is off , but it is possible to activate it manually. 3 ExtraHygiene This option provides better hygiene results by keeping the temperature at 70 °C for at least 10 minutes during the last rinsing phase. Make sure that the current level of the water softener agrees with the hardness of the water supply. Start a programme to remove any processing residuals that can still be inside the appliance. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. Carefully shake the funnel by its handle to get the last granules inside. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. Turn the cap of the salt container clockwise to close the salt container. After you fill the salt container, immediately start the shortest programme to prevent corrosion. €¢ If the rinse aid indicator is on, fill the rinse aid dispenser. Set and start a programme suitable for the type of load and the degree of soil. 1 Using the detergent A B Starting a programme with delay start 1. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). During the countdown, it is possible to increase the delay time but not to change the programme and options. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again. press and hold RESET until the appliance is in programme selection mode. [. . . ] €¢ There is no rinse aid or the dosage of rinse aid is not sufficient. €¢ We recommend to always use rinse aid, even in combination with multi-tablets. • For the best drying performance , activate XtraDry and AirDry . €¢ The programme does not have a drying phase or has a drying phase with low temperature. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX FSE62700P




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX FSE62700P will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.