User manual AEG-ELECTROLUX FAVORIT AAAUTO

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. Operation instructions Safety information Correct use General safety Child safety Installation Product description Control panel The digital display Function buttons Setting mode First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 6 6 6 7 7 8 8 8 9 10 10 Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. [. . . ] Once the programme is running, the "Multi-Tab function " can NO longer be changed. If you want to exclude the "Multi-Tab function " you have to cancel the programme setting and then deactivate the "Multi-Tab function ". In this case you have to set a washing programme (and desired options) again. The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function" active. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing. To change the setting, press button B again, the digital display indicates the new setting. If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. When a programme has been selected the corresponding light will illuminate. The the lights of the phases will turn off except for the phase underway. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. The number in the display is no longer flashing but fixed with static light. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Close the door; the programme will start from the point at which it was interrupted. [. . . ] If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · the electrical cable for the safety valve is in the double-walled water inlet hose. A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. to the sink outlet spigot , securing it to the underside of the work surface. [. . . ]