User manual AEG-ELECTROLUX F88420VI

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode Audible signals First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 7 7 7 8 8 9 9 10 11 11 Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. [. . . ] Once this function is selected (indicator light illuminated) it will remain active also for the following washing programmes. With the use of the "Multitab function", the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated. Once the programme is running, the "Multitab function " can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ". In this case you have to set a washing programme (and desired options) again. The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active. Press simultaneously buttons B and C , until the lights of buttons A , B , and C start flashing. Press button B , the lights of buttons A and C turn off while the light of button B goes on flashing. To change the setting, press button B again, the digital display indicates the new setting. If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Heavy soil Crockery, cutlery, pots and pans Crockery and cutlery Crockery and cutlery Crockery and cutlery Delicate crockery and glassware Partial load (to be completed later in the day)5) 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 5) This programme does not require the use of detergent Option available with washing programme Programme 1 NIGHT CYCLE 2 AUTO 45-70° 3 INTENSIV CARE 70° 4 30 MIN 60° 5 ECO 50° 6 1 HOUR 55° 7 GLASS 45° 8 RINSE AND HOLD Half load Yes No Yes No Yes No No No Press one of the programme selection buttons until the number corresponding to the required programme shows in the digital display (see "Washing programmes" chart). The lights of the programme selection buttons and programme number are flashing. If you want to set the NIGHT CYCLE programme, press the NIGHT CYCLE button, the corresponding indicator light comes on. If you want to set option please refer to the "Washing programmes" chart to be sure that the option is available with the selected programme. After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. [. . . ] Please take care when installing the water inlet hose: · the electrical cable for the safety valve is in the double-walled water inlet hose. A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. to the sink outlet spigot , securing it to the underside of the work surface. The waste connection must be at a maximum height of 60 cm from the bottom of the dishwasher. [. . . ]