User manual AEG-ELECTROLUX F65410VI

[. . . ] We wish you much joy with your new appliance. Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel The digital display Function buttons Setting mode First use Setting the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 5 6 7 7 7 8 8 8 9 9 10 11 11 Activation/deactivation of the Multitab function 18 Washing programmes 18 Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Installation instructions 20 21 21 21 22 23 23 23 23 23 23 25 25 Loading cutlery and dishes 12 The lower basket 13 The cutlery basket 13 The upper basket 14 Adjusting the height of the upper basket 15 Use of detergent 16 Fill with detergent 16 Multitab function 17 Installation 25 Fitting under a counter (kitchen worktop or sink) 26 Levelling 26 Water connection 27 Water supply connections 27 Water inlet hose with safety valve 27 Water outlet hose connection 28 Electrical connection 29 Environment concerns 29 Packaging material 29 Subject to change without notice Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. [. . . ] In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Press the Multitab button: the corresponding indicator light illuminates. To deactivate the function press the Multitab button again: the indicator light turns off. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active. Press simultaneously buttons B and C , until the lights of buttons A , B , and C start flashing. Press button B , the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Press the On/Off button again; the programme will start from the point at which it was interrupted. End of the washing programme · The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. It is recommended to switch off the appliance once the washing programme has ended. If this is not done, automatically after about 3 minutes from the end of the programme, all indicator lights will go off. This will help to reduce the consumption of energy when you forget or for any reason cannot switch the appliance off once the programme has ended. Press any button (except On/Off) and the control panel will show the same situation (indicator lights and digital display) as when the programme ended. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. The dishwasher filter system comprises a coarse filter ( A ), a microfilter ( B ) and a flat filter. [. . . ] If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · The electrical cable for the safety valve is in the double-walled water inlet hose. · If water inlet hose or the safety valve is damaged, remove the mains plug immediately. · A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. 28 Water connection WARNING! [. . . ]