User manual AEG-ELECTROLUX F60767

[. . . ] We wish you much joy with your new appliance. Contents Operating instructions Safety information Correct use General safety Child safety Installation Product description Control panel The digital display Function buttons Setting mode First use Setting the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 6 6 6 7 7 8 8 9 9 10 11 Multitab function Activation/deactivation of the Multitab function Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Installation instructions Installation Building-in Water connection Water supply connections Water inlet hose with safety valve Water outlet hose connection Electrical connection Environment concerns Packaging material 17 17 18 19 20 21 21 22 22 22 22 22 23 23 25 25 25 25 27 27 28 28 29 30 30 Loading cutlery and dishes 11 The lower basket 12 The cutlery basket 12 The upper basket 14 Adjusting the height of the upper basket 15 Use of detergent 15 Fill with detergent 16 Subject to change without notice Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. [. . . ] Press button B , the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. 18 Washing programmes If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes Programme Degree of soil Type of load Programme description Consumption values 1) - Duration (minutes)2) 1/2x Intermediate rinse 1, 1 - 1, 7 Energy (kWh) 1, 5 -1, 7 0, 9 0, 8 -0, 9 1, 0 - 1, 1 0, 1 AUTO 45-70°3) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Heavy soil Crockery, cutlery, pots and pans Crockery and cutlery Crockery and cutlery Delicate crockery and glassware Partial load (to be completed later in the day)6) 30 MIN 60°4) ECO 50°5) Light soil Normal soil Normal soil - - - Any - 4 14 - 15 12 - 13 9 16 - 18 INTENSIV CARE 70° - 12 - 23 Water (litres) Main wash Final rinse Prewash Drying Select and start a washing programme Programme Degree of soil Type of load Programme description 19 Consumption values 1) - Duration (minutes)2) Intermediate rinse 1. 2 - 1. 3 Energy (kWh) EXTRA SILENT Normal soil Crockery and cutlery 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 3) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. Press any button (except On/Off) and the control panel will show the same situation (indicator lights and digital display) as when the programme ended. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Care and cleaning 21 · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. The dishwasher filter system comprises a coarse filter ( A ), a microfilter ( B ) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. Take hold of the coarse filter ( A ) by the handle with the hole and remove from the microfilter ( B ). Clean all filters thoroughly under running water. 22 Care and cleaning 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. [. . . ] If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · The electrical cable for the safety valve is in the double-walled water inlet hose. · If water inlet hose or the safety valve is damaged, remove the mains plug immediately. · A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. [. . . ]