User manual AEG-ELECTROLUX F54860

[. . . ] We wish you much joy with your new appliance. Contents Operating Instructions Safety information Correct use General safety Child safety Installation Product description Control panel Setting mode First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use 3 3 3 3 3 4 4 5 6 6 7 7 8 8 9 10 10 Washing programmes Select and start a washing programme Unloading the dishwasher Care and cleaning Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if. . . Technical data Hints for test institutes Installation instructions 17 17 19 19 19 20 20 20 21 21 21 21 23 23 24 Loading cutlery and dishes 11 The lower basket 12 The cutlery basket 12 The upper basket 13 Adjusting the height of the upper basket 14 Use of detergent 14 Fill with detergent 15 Multi-tab function 15 Activation/deactivation of the Multi-Tab function 16 Installation 24 Fitting under a counter (kitchen worktop or sink) 25 Levelling 25 Water connection 25 Water supply connections 25 Water inlet hose with safety valve 26 Water outlet hose connection 27 Electrical connection 28 Environment concerns Packaging material 28 28 Subject to change without notice Safety information 3 Operating Instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. [. . . ] To deactivate the function press the same buttons again until the "Multi-Tab function" indicator light turns off. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function" active. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing: the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated. To change the setting, press button B again until the end of programme indicator light turns off. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes 17 Washing programmes Programme Degree of soil Type of load Programme description 1/2x Intermediate rinse Consumption values1) 80 -125 Duration (minutes) 0, 8 0, 8 - 1, 3 Energy (kWh) 1, 3 -1, 5 0, 8 - 0, 9 0, 1 AUTO 45° 70°2) 30 MIN 60°3) INTENSIV CARE 70° ECO 50° 4) Mixed nor- Crockery, mal and cutlery, pots heavy soil and pans Light soil Heavy soil Crockery and cutlery Crockery, cutlery, pots and pans 30 Any Partial load (to be completed later in the day)5) 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 2) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. Close the door; the programme will start from the point at which it was interrupted. Press the On/Off button again; the programme will start from the point at which it was interrupted. End of the washing programme · The dishwasher will automatically stop. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher 19 Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove the filter system. 20 Care and cleaning 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. [. . . ] If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · The electrical cable for the safety valve is in the double-walled water inlet hose. · If water inlet hose or the safety valve is damaged, remove the mains plug immediately. · A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre. Water connection WARNING! [. . . ]