User manual AEG-ELECTROLUX F54000VI0

[. . . ] ⷠObey the safety instructions from the detergent manufacturer to prevent burns to eyes, mouth and throat. ⷠDo not keep the appliance door open without supervision. Do not use the appliance for other uses to prevent injury to persons and damage to property. ⷠOnly use the appliance to clean accessories that are applicable for dishwashers. [. . . ] ⷠDo not keep the appliance door open when there is detergent in the detergent dispenser. ⷠFill the detergent dispenser only before you start a washing programme. Indicator lights It comes on when it is necessary to fill the salt container. After you fill the container, the salt indicator light can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates. Set the correct washing programme according to the type of load and soil (refer to 'Washing programmes'). Use this button to delay the start of the washing programme with an interval of 3, 6 or 9 hours. Use the function buttons for these operations: The appliance must be in setting mode for these operations: · The appliance is not in setting mode when: ­ Only one programme indicator light comes on. ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. Be sure that the set level of the water softener agrees with the water hardness in your area. If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function (refer to 'Multitab function'). Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Press and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. ­ The indicator light for function button A continues to flash. Each time you press function button A, the adjustment goes to the subsequent level. Fill the salt container with 1 litre of water (only for the first time you fill with salt). It is correct that water comes out from the salt container when you fill it with salt. To help the environment, do not use more than the correct quantity of detergent. follow the detergent manufacturer recommendations on the detergent packaging. [. . . ] You have set a washing programme without drying phase or with a decreased drying phase. Press and hold function buttons B and C until the indicator lights for function buttons A, B, and C start to flash. ­ The indicator light for function button B continues to flash. To deactivate the rinse aid dispenser, do the same procedure until the end-of-programme indicator light goes off. [. . . ]