User manual AEG-ELECTROLUX EX 150 E

[. . . ] Date 2006/12/12 2007/03/29 2008/04/16 Page 13-38 15-40 8 14-40 1-44 14 Changes Technical data: Typical weighted acceleration 11, 8 -> 5, 4 ms2 Change Text Add text Add new safety hints, update CE Declaration, add new symbol Add foldout pages, change Layout Correct text Please read and save these instructions!Press carefully the fuzzy side of sanding disc against the packaging pad, as firmly as possible. [. . . ] Always disconnect the plug from the socket before carrying out any work on the machine. Before use check machine, cable, and plug for any damages or material fatigue. When working oak or beech wood, stones, paint, which could contain lead or other harmful chemicals). Use a dust absorption system and wear a suitable dust protection mask. sPECIFIED CONDITIONS OF USE This random orbital sander is a versatile machine. The following work can be carried out with it: Coarse sanding and grinding, Fine sanding and polishing, Rubbing down weather-beaten paint, Polishing up scratches on acrylic glass, Etc. To provide the best adhesion, it is recommended that you clean the backing pad and the sanding disc backing occasionally by brushing them lightly with a small brush. MAINS CONNECTION Connect only to single-phase AC current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Rainer Kumpf Manager Product Development ADVICE FOR OPERATION Only use original AEG sanding and polishing tools with selfadhesive velcro fastening. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. [. . . ] In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]