User manual AEG-ELECTROLUX EWF166110W

[. . . ] Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. €¢ You MUST read them carefully before installing or using the appliance. €¢ Before first starting up, check the appliance for any damage incurred during transport. €¢ If the appliance is delivered in the winter months when there are minus temperatures. [. . . ] rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and dab the stain. Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Ink: depending on the type of ink, moisten the fabric first with acetone1), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. 1) do not use acetone on artificial silk DETERGENTS AND ADDITIVES Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature. The washing machine will propose a temperature and automatically select the maximum spin value provi- electrolux 15 ded for the programme you have chosen. At the end of the programme the selector dial must be turned to position , to switch the machine off. sELECT THE TEMPERATURE BY PRESSING BUTTON 2 By selecting a programme , the appliance proposes automatically a default temperature. Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a different temperature. REDUCE THE SPIN SPEED BY PRESSING BUTTON 3 By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. SELECT THE AVAILABLE OPTIONS BY PRESSING BUTTONS 3, 4 AND 5 Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing button 8. When these buttons are pressed, the corresponding icons appear on the display. If an incorrect option is selected, the integrated red pilot light of the button 8 flashes for 3 times and the Err message appears on the display for a few seconds. For the compatibility among the washing programmes and the options see chapter «Washing Programmes». [. . . ] The other end of the inlet hose which connects to the appliance can be turned as showed in the picture. Angle the hose to the left or right depending on the position of your water tap. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. €¢ Hooked over the edge of a sink using the plastic hose guide supplied with the machine. [. . . ]