User manual AEG-ELECTROLUX ESF68020

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ESF68020. We hope that this AEG-ELECTROLUX ESF68020 user guide will be useful to you.


AEG-ELECTROLUX ESF68020 : Download the complete user guide (1514 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ESF68020 (1505 ko)
   AEG-ELECTROLUX ESF68020 (1508 ko)

Manual abstract: user guide AEG-ELECTROLUX ESF68020

Detailed instructions for use are in the User's Guide.

[. . . ] Good luck! 4 electrolux contents Contents Safety information Product description Control panel First use Daily use Washing programmes Care and cleaning Something not working Technical data Hints for test institutes Installation Environment concerns Guarantee/Customer Service 5 7 8 11 15 27 29 31 34 36 37 41 42 The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information safety information electrolux 5 Safety information q In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. [. . . ] Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Press the button corresponding to the required programme (see "Washing programmes" chart). When a programme has been selected the corresponding light will illuminate. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. You can choose from 1 to 19 hours of delay. With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. daily use electrolux 25 Cancelling the "delay start" q To cancel a delay start in progress you have to reset the dishwasher. q Press simultaneously and keep pressed the two programme buttons positioned over the writing Cancel, until all the programme button lights will illuminate. Cancel a washing programme in progress q Press simultaneously and keep pressed the two programme buttons positioned over the writing Cancel, until all the programme button lights illuminate. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. End of the washing programme The dishwasher will automatically stop and the programme in progress indicator light turns off. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. q q Cancelling a delay start involves also the cancelling of the washing programme set. Frost precautions Avoid placing the machine in a location where the temperature is below 0C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it. Moving the machine If you have to move the machine (moving house etc. . . . ): 1. Avoid over tilting the machine during transportation. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc. . . . ). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65C wash programme without dishes using detergent. something not working electrolux 31 Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions. Fault code q Malfunction q Possible cause The water tap is blocked or furred with limescale q Solution Clean the water tap continuous flashing The dishwasher of the light of the does not fill with running water programme appears in the digital display q The water tap is turned off q The filter (where present) in the threaded hose fitting at the water inlet valve is blocked q The water inlet hose has not been correctly laid or it is bent or squashed q q Turn the water tap on q Clean the filter in the threaded hose q q Check the water drain hose connection q continuous flashing The dishwasher will of the light of the not drain running programme appears in the digital display continuous flashing Anti-flood device is of the light of the activated running programme appears in the digital display The sink spigot is blocked The water drain hose has not been correctly laid or it is bent or squashed q Clean out the sink spigot Check the water drain hose connection q q q q q Close the water tap and contact your local Service Force Centre q 32 electrolux something not working Fault code Malfunction The programme does not start q Possible cause The dishwasher's door has not been properly closed The main plug is not plugged in The fuse has blown out in the household fuse box Delay start has been set q Solution Close the door q q Insert the main plug Replace the fuse q q q q If dishes are to be washed immediately, cancel the delay start Once these checks have been carried out; close the dishwasher's door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted. [. . . ] Appliances that are easy to transport may be delivered or sent to the consumer services department. Home repairs are only anticipated for bulky appliances or built-in appliances. If the appliances are built-in, builtunder, fixed or suspended in such a way that removing and replacing them in the place where they are fitted takes more than half an hour, the costs that result therefrom will be charged for. Connected damage caused by these removal and replacement operations will be the responsibility of the user. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ESF68020




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ESF68020 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.