User manual AEG-ELECTROLUX ESF6700ROX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ESF6700ROX. We hope that this AEG-ELECTROLUX ESF6700ROX user guide will be useful to you.


AEG-ELECTROLUX ESF6700ROX : Download the complete user guide (10084 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ESF6700ROX (9268 ko)
   AEG-ELECTROLUX ESF6700ROX (9268 ko)

Manual abstract: user guide AEG-ELECTROLUX ESF6700ROX

Detailed instructions for use are in the User's Guide.

[. . . ] Correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. · Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. · Only use products (detergent, salt and rinse aid) suitable for dishwashers. · Avoid opening the door whilst the appliance is in operation, hot steam may escape. [. . . ] With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. When using the "Multitab function", the cycle durations may change. If this is the case, the running time for the programme is automatically updated on the digital display. Activate/deactivate the ''Multitab function'' before the start of a washing programme. Once the programme is running, the "Multitab function " can NO longer be changed. If you want to cancel the "Multitab function " you have to cancel the programme setting and then deactivate the ''Multitab function''. In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Simultaneously press and hold the two Multitab buttons (function buttons D and E) until the Multitab indicator light comes on. To deactivate the function press the same buttons again until the indicator light corresponding to the Multitab function symbol goes off. electrolux 15 If the drying results are not satisfactory we suggest that you: 1. · The activation/deactivation of the rinse aid is only possible with the Multitab function active. Simultaneously press and hold function buttons B and C, until the lights of function buttons A , B, and C start flashing. Press the On/Off button again; the programme will start from the point at which it was interrupted. Cancel a delay start or a washing programme in progress · Simultaneously press and hold the two function buttons B and C until all the programme lights come on. · Cancelling a delay start will also cancel the washing programme. · If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. End of the washing programme · The dishwasher will automatically stop and the programme in progress indicator light goes off. Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes; this way they will be cooler and the drying will be improved. Standby mode If you do not switch off the appliance at the end of the washing programme, the appliance automatically goes into standby mode. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar. Press one of the buttons (not the on/off button), to go back to end-of-programme mode. Unloading the dishwasher · Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. · Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. · Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. [. . . ] Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under electrolux 23 pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: · The electrical cable for the safety valve is in the double-walled water inlet hose. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ESF6700ROX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ESF6700ROX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.