User manual AEG-ELECTROLUX ESF6562

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ESF6562. We hope that this AEG-ELECTROLUX ESF6562 user guide will be useful to you.


AEG-ELECTROLUX ESF6562 : Download the complete user guide (1664 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ESF6562 (1668 ko)
   AEG-ELECTROLUX ESF6562 (723 ko)

Manual abstract: user guide AEG-ELECTROLUX ESF6562

Detailed instructions for use are in the User's Guide.

[. . . ] General information and tips Environmental information 4 electrolux Contents Safety information 5 Product description 7 Control panel 7 First use 9 Set the water softener 10 Filling with dishwasher salt 12 Use of rinse aid 13 Adjusting the dosage of rinse aid 14 Daily use 14 Loading cutlery and dishes 15 Use of detergent 18 Select and start a washing programme Unloading the dishwasher Washing programmes Care and cleaning Something not working Technical data Consumption values Hints for test institutes Installation Environment concerns 20 22 22 23 26 29 29 30 31 35 safety information electrolux 5 Safety information · Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. · After use, isolate the appliance from the power supply and turn off the water supply. · This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used. · Under no circumstances should you attempt to repair the machine yourself. [. . . ] In this case the rinse aid indicator light will always remain illuminated when the machine is switched on (not all dishwasher models are foreseen with rinse aid indicator light). Detergent tablets 20 electrolux select and start a washing programme 1. Adjust the water hardness setting to the highest setting and perform washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. If the drying results are not satisfactory we recommend that you: 1. If you decide to turn back to the use of the standard detergent system we advise that you: Select and start a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Turn the programme knob until the programme marker corresponds with the desired programme (see "Washing programmes" chart). ­ The indicator lights of the phases foreseen for the programme start flashing. Press the start/cancel button, the programme starts automatically and the start/cancel indicator light illuminates. ­ As soon as the programme starts, the phase indicator lights turn off except for the indicator light for the phase in progress which will remain lit with a static light. During the running of the programme, it is not possible to change the selection made by turning the programme knob in correspondence of another programme or the Off position. If you want to change the running programme you must cancel the selection made (see "Cancel a washing programme in progress"). Setting and starting the programme with "delay start" · Allows the start of the programme to be delayed by 3 hours. select and start a washing programme electrolux 21 1. 2) Test programme for test institutes. Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter. Before cleaning the filters ensure that the machine is switched off. 24 electrolux care and cleaning 7. 3. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly under the two guides (C). Place the coarse filter (A) in the microfilter (B) and press together. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. care and cleaning electrolux 25 Prolonged periods of nonoperation NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance. If you are not using the machine for any prolonged period of time you are advised to: 1. [. . . ] Tighten the machine in position (upwards or sideways) by using the screws supplied (3. 5 x 16 mm). Tighten the screws so that the dishwasher cannot tip forward and cause damage when the door is open and loaded. The dishwasher must be secured to the underside of the worktop or to adjacent units by using the brackets supplied. Under no circumstances may holes be drilled through the sides of the dishwasher since this could damage the hydraulic components. The dishwasher must be secured to the underside of the worktop or to adjacent units by using the brackets supplied. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ESF6562




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ESF6562 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.