User manual AEG-ELECTROLUX ESF6522

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ESF6522. We hope that this AEG-ELECTROLUX ESF6522 user guide will be useful to you.


AEG-ELECTROLUX ESF6522 : Download the complete user guide (647 Ko)

Manual abstract: user guide AEG-ELECTROLUX ESF6522

Detailed instructions for use are in the User's Guide.

[. . . ] Isolate the appliance from the power supply and turn off the water supply after use. Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken. This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. [. . . ] Move the front runnner stops (A) of the upper basket outwards and slide the basket out. Refit the basket in the higher position and replace the stops (A) in their original position. When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks. A RC01 After loading your machine always close the door, as an open door can be a hazard. 34 Use of detergent Only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: 1. Add the detergent according to the instructions given in the Washing programmes chart. As all detergents are not the same, you should also consult the instructions on the packet. If the programme has a prewash add a little amount of detergent over the lid of the dispenser. When buying new dishes, ensure that they are dishwasher proof. For best washing results Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible. The products In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers. To ensure that your dishwasher functions perfectly, Zanussi recommends using Calgonit System, a unique and complete product, tested by millions of householders. Calgonit System includes Calgonit detergent, rinse aid, salt, machine detergent and Citro-Fresh. During the countdown the only indicator lights illuminated are the programme light and the light of the number of hours to the start of the programme. Once the delayed time has elapsed the programme will start automatically. 5. Measure out detergent Add the required amount of detergent into the dispenser according to the recommended quantity given in the Washing programmes chart. Setting and starting the programme without delay start Press the push button corresponding to the wanted programme: the indicator light corresponding to the programme illuminates and the phase indicator lights foreseen for that programme start flashing. 38 It is possible to stop a countdown in progress or before it starts, simply pressing the delay start push button until the indicator lights of the hours are off. 9. To cancel a programme in progress A programme in progress can be cancelled at any time. Press for about 3 seconds the push button of the running programme until all indicator lights are off. Only the On/Off indicator light will remain on once the programme has been cancelled. In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. 10. At the end of the washing programme The dishwasher will automatically stop and the phase indicator light end of programme will come on. The dishwasher has finished the programme only when the phase indicator light end of programme is illuminated. [. . . ] Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter. For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto either a 3/4 inch gas thread spout, or to a purpose made quick-coupling tap such as the Press-block. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ESF6522




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ESF6522 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.