User manual AEG-ELECTROLUX EGG6343NDX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EGG6343NDX. We hope that this AEG-ELECTROLUX EGG6343NDX user guide will be useful to you.


AEG-ELECTROLUX EGG6343NDX : Download the complete user guide (3704 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EGG6343NDX (4870 ko)
   AEG-ELECTROLUX EGG6343NDX (5971 ko)
   AEG-ELECTROLUX EGG6343NDX (5971 ko)
   AEG-ELECTROLUX EGG6343NDX (2645 ko)

Manual abstract: user guide AEG-ELECTROLUX EGG6343NDX

Detailed instructions for use are in the User's Guide.

[. . . ] For hygiene and safety reasons, this appliance should be kept clean at all times. Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage. Perishable food, plastic items and areosols may be affected by heat and should not be stored above or below the hob unit. Under no circumstances should you attempt to repair the appliance yourself. [. . . ] If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat. Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. Prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Make sure pots do not protrude over the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption. Do not place unstable or deformed pots on the rings: they could tip over or spill their contents, causing accidents. As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table). 160 mm. Large (rapid) Medium (semi-rapid) Small (auxiliary) 4 Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Burners The burner caps and crowns can be removed for cleaning. Wash the burner caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. 1) Remove the pan supports, the burners caps and crowns and turn the hob upside down, taking care the ignition candles are not damaged in this operation. 2) Place the relevant sealing all around the glass top edge, taking care that the sealings meet without overlapping (Fig. 5). FO 2108 4 5 A " 8 a) Sealing gasket Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. The manufacturer declines any liability should these safety measures not be observed. This hob is designed to be connected to a 230-240V 50Hz AC electrical supply. Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live -- Connect the green and yellow (earth) wire to the terminal in the plug which is marked with or coloured the letter 'E' or the earth symbol green and yellow. -- Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black. [. . . ] Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below. Procedure: " Re-ignite the burner and set to MIN. To adjust, use a thin bladed screwdriver and turn the adjustment screw (see diagram) until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners. Minimum adjustment screw Pressure Testing " Remove left hand pan support and front left burner cap and crown. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EGG6343NDX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EGG6343NDX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.