User manual AEG-ELECTROLUX CROWN ITECH

[. . . ] I-Tech Series I-T4000 Operation Manual I-T6000 I-T8000 Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000. This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during installation, operation or maintenance. [. . . ] This permits extensive amp and speaker diagnostics and control by computer. For example, your amplifier's DSP functions can be controlled and monitored by a computer running IQwic software. The computer connects to the amplifier on a TCP/IQ network via a Category 5 cable plugged into the Network connector on the back of the amplifier. The TCP/IQ format uses off-the-shelf, fast (100 Mb) Ethernet connections. Every component in a TCP/IQ network is identified by a unique address. Before you set up a TCP/IQ network with addressing, it's important to understand all the terms involved. 4. 5. 3 Glossary Network: A group of interconnected components, such as a central computer, network switching equipment, and other computers or devices. TCP/IQ network: A network made of a computer, network switching equipment, and other audio devices such as IQ-PIP cards plugged into power amps. Since each I-Tech amp connects directly to a network, each amp is also a network component. For example, a TCP/IQ audio network might be a subnet of a venue's network, which could include computers throughout the building. For example, one audio subnet might be for the house system and another audio subnet might be for the paging system. IP address: An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. A TCP/ IP or IP address has two parts: the NETWORK ID and the HOST ID. The NETWORK ID identifies the network, and the HOST ID identifies either the subnet and device, or just the device if there is no subnet. The subnet mask is a code that indicates which part of the TCP/IP address is the NETWORK ID and which part is the HOST ID. In subnet-mask code, 255 means "This part of the address is the NETWORK ID". Example: Suppose the IP ADDRESS of a device is 126. 126. 17. 42 and the SUBNET MASK is 255. 255. 0. 0. If your audio network stands alone (it is not part of a larger network) then the HOST ID identifies each device in the network. If your audio network is part of a venue's larger network, your network is actually a sub-network or subnet. In this case, the HOST ID can be further divided into two or more parts. The first part of the HOST ID identifies the subnet of your audio system, and the remaining part identifies the particular device within that subnet. [. . . ] Warranty work can only be performed at our authorized service centers. We will remedy the defect and ship the product from the service center within a reasonable time after receipt of the defective product at our authorized service center. HOW TO OBTAIN WARRANTY SERVICE You must notify your local Crown importer of your need for warranty service within the warranty period. Corrective action will be taken within a reasonable time of the date of receipt of the defective product by our authorized service center. [. . . ]