User manual AEG-ELECTROLUX B4-1050 SUPERTORQUE

[. . . ] in case of deviating mains voltage , the data stated on the rating plate are applicable. [. . . ] Always disconnect the plug from the socket before carrying out any work on the machine. Always use the auxiliary handle, even if the machine has a safety clutch since this safety clutch only engages when the machine blocks with a jerk. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The drill can be used for drilling in wood, metal and plastics. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Volker Siegle Manager Product Development MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be exchanged which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). [. . . ] NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]