User manual AEG-ELECTROLUX AEG F.60760 UK

[. . . ] FAVORIT 60760 User manual Dishwasher 2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. [. . . ] The digital display indicates the current setting: = Rinse aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the new setting. To memorise the operation, switch off the dishwasher by pressing the On/Off button. Washing programmes 19 If you decide to turn back to the use of standard detergent system we advise that you: 1. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Washing programmes Programme Degree of soil Type of load Programme description Consumption values 1) - Duration (minutes)2) 1/2x Intermediate rinse 1, 1 - 1, 7 Energy (kWh) 1, 5 -1, 7 0, 9 0, 8 -0, 9 1, 0 - 1, 1 0, 1 AUTO 45-70°3) Mixed nor- Crockery, mal and cutlery, heavy soil pots and pans Heavy soil Crockery, cutlery, pots and pans Crockery and cutlery Crockery and cutlery Delicate crockery and glassware Partial load (to be completed later in the day)6) 30 MIN 60°4) ECO 50°5) Light soil Normal soil Normal soil - - - Any - 4 14 - 15 12 - 13 9 16 - 18 INTENSIV CARE 70° - 12 - 23 Water (litres) Main wash Final rinse Prewash Drying 20 Select and start a washing programme Programme Degree of soil Type of load Programme description Consumption values 1) - Duration (minutes)2) Intermediate rinse 1. 2 - 1. 3 Energy (kWh) NIGHT CYCLE Normal soil Crockery and cutlery 1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 3) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45° C and 70° C. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. 6) This programme does not require the use of detergent Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. When a programme is selected the corresponding programme light illuminates and the programme time flashes on the digital display. If you want to set the NIGHT CYCLE programme, press the NIGHT CYCLE button, the corresponding indicator light comes on. Close the dishwasher door, the programme starts automatically. Setting and starting the programme with delay start 1. After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours. The countdown will decrease with steps of 1 hour. 13 - 14 Water (litres) Main wash Final rinse Prewash Drying Unloading the dishwasher 21 4. Close the door; the countdown will continue from the point at which it was interrupted. Once the delay start has elapsed the programme will start automatically. The selection of the washing programme and delay start can also occur with the door closed. [. . . ] This appliance complies with the applicable plumbing regulations. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. [. . . ]