User manual AEG-ELECTROLUX ACX6206N

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ACX6206N. We hope that this AEG-ELECTROLUX ACX6206N user guide will be useful to you.


Manual abstract: user guide AEG-ELECTROLUX ACX6206N

Detailed instructions for use are in the User's Guide.

[. . . ] This symbol and numbered instructions guide you step by step in the operation of the appliance. . . . . . 1 3 2 Supplementary information regarding operation and practical applications of the appliance appear after this symbol. Tips and notes concerning economical and environmentally sound use of the appliance are marked with the cloverleaf. Explanations of the technical terminology used in the operating instructions can be found at the end in the section "Technical Terminology". [. . . ] The TURBO/FROSTMATIC function can be ended manually at any time by pressing the TURBO/FROSTMATIC button again. The yellow light goes out. 818 35 79-00/5 159 If the TURBO/FROSTMATIC function is not ended manually, the appliance electronics switch off the TURBO/FROSTMATIC function of the freezing mode after approx. 50 hours, and the TURBO/FROSTMATIC function of the cooling mode after 6 hours. Once the TURBO/FROSTMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed. ALARM OFF button With the ALARM OFF button, the acoustic warning signal can be switched off, e. g. the "Open Door" warning when sorting in or out, the commodities to be frozen. When there is a temperature warning, if the ALARM OFF button is activated the temperature display will show the warmest temperature the frozen food has reached on restoration of the power supply. Prior to Initial Start­Up Before connecting the appliance to the mains and putting it into operation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 4 hours before putting it into operation. This is necessary to allow the refrigerant to flow back into the compressor. Please clean the appliance interior and all accessories prior to initial start-up (see section: "Maintenance and Cleaning"). The appliance must be correctly installed in accordance with the chapter "Installation" before it is put into operation for the first time. Care should be especially taken that the mains voltage and frequency available correspond with the appliance's rating plate. A so-called "count down" is started in the temperature display, which counts backwards from "3" to "1". Illumination at the temperature display goes off. 3 The appliance is only completely disconnected from the electricity supply when the power plug has been removed from the power outlet. Note: The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Following connection to the mains power supply, the appliance returns to the same operating state as before the interruption of main power. If the appliance is not going to be used for an extended period: 0 1. Switch appliance off by pressing and holding the ON/OFF button for approximately 1 second. Leave door open to avoid accumulation of odours. 3 When put into operation again, the appliance starts in the operation mode, in which it was set prior to switching off. Opening the door If the door is closed when the appliance is in operation, it cannot be immediately opened again, because a vacuum occurs which holds the door closed until pressure has been equalised. If your appliance is equipped with a QUICK door opener - an opening mechanism integrated into the door handle - the door can be opened easily at any time. 818 35 79-00/5 163 Control and Information Systems The control and information system consist of the temperature display, an optical warning display and an acoustic warning. The system warns: ­ when first switching on the appliance (when the storage temperature has not yet been attained); ­ if the appliance door remains open for longer than 80 seconds (operation mode "Freezing") or for longer than 5 minutes (operation mode "Cooling"); ­ of excessive temperature in the freezer compartment (only in the operation mode "Freezing"); ­ of functional disturbances at the appliance. "Open Door"-Warning If the door remains open longer than approx. 80 seconds (operation mode "Freezing") or longer than 5 minutes (operation mode "Cooling"), the red warning indicator flashes and a warning tone sounds. If you need more time for sorting or rearranging frozen or cooled foodstuff, you can switch off warning tone for 80 seconds (operation mode "Freezing") or for 5 minutes (operation mode "Cooling") by pressing the ALARM OFF button. [. . . ] For replacement of the light bulb press the cover and remove it like shown on the illustration. Place the cover again. 1 Noises during Operation The following noises are characteristic of refrigeration appliances: · Clicks Whenever the compressor switches on or off, a click can be heard. · Humming As soon as the compressor is in operation, you can hear it humming. · Bubbling/Splashing When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ACX6206N




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ACX6206N will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.