User manual ACER X1263

[. . . ] 1 Usage Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This connector supports Digital RGB, Analog RGB, YPbPr (480p/576p/720p/ 1080i) and YCbCr (480i/576i). Component Press "Component" to change source to component connector. This connector supports YPbPr (480p/576p/720p/1080i) and YCbCr (480i/576i). Video Press "Video" to change source to Composite Video source. Laser Button (for PD126D only) Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. Mouse Right Click / Mouse Left Click (for PD126D only) These functions are the same as a mouse of PC or Mac. English. . . 18 User Controls On-Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or press "Menu"on the Control Panel. After selecting the desired main menu item, press to enter sub menu for feature setting. Use by keys to select the desired item and adjust the settings key. NOTE 4. English User Controls Image (Video Mode) Keystone Adjust image distortion caused by tilting projection. ( 15 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. Auto : Keep the image with original width-height ratio and maximize the image to fit native horizontal or vertical pixels. 16:9 : The input source will be scaled to fit the width of the screen. 480p : Crop a 480p video signal to 800x480 resolution (for SVGA model). Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. Sharpness Adjusts the sharpness of the image. to increase the sharpness. English. . . 24 User Controls Management (Computer / Video Mode) ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Auto Shutdown The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it will "Lock" the current source channel before you press "Source" button on remote control for next channel. Menu Location Choose the Menu location on the display screen. 25 . . . English User Controls Management (Computer / Video Mode) Startup Screen Use this function to select your desired start-up screen. [. . . ] The bulb may shatter and cause injury if it is dropped. Lamp Changing Procedure: 1. Turn the power off the projector by pressing the " " button. English Appendices Specifications The specs specified below are subject to change without notice. Regarding the final specs, please refer to Acer accounced marketing specs. [. . . ]