User manual ACER X1230

[. . . ] Acer Projector X1130/X1230/X1230S Series User's Guide Copyright © 2009. Acer Projector X1130/X1230/X1230S Series User's Guide Original Issue: 1/2009 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. [. . . ] Use Tilt adjusting wheel to fine-tune the display angle. To lower the image: 1 2 3 Press the elevator button. Lower the image to the desired height angle, then release the button to lock the elevator foot into position. Use Tilt adjusting wheel to fine-tune the display angle. Elevator button 1 Tilt adjusting wheel 3 2 Elevator foot 11 How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. English · X1130/X1230 If the projector is 3 m from the screen, good image quality is possible for image sizes between 72" and 79". Note: Remind as below figure, the space of 132 cm height is required when located at 3 m distance. Max scre en s iz e Min scre en s iz 79" e 72" Height: 132 cm From base to top of image Height: 121 cm 3m Desired distance Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom) Desired From base to From base to Distance Diagonal Diagonal top of image top of image (m) (inch) W (cm) x H (cm) (inch) W (cm) x H (cm) (cm) (cm) <A> <B> <B> <C> <C> 1 2 2. 5 3 3. 5 4 4. 5 5 6 7 8 9 10 24 48 60 72 84 96 108 120 144 168 192 216 241 49 x 37 98 x 74 123 x 92 147 x 110 172 x 129 196 x 147 221 x 165 245 x 184 294 x 221 343 x 257 392 x 294 441 x 331 490 x 368 40 80 101 121 141 161 181 201 241 282 322 362 404 26 53 66 79 93 106 119 132 159 185 212 238 265 54 x 40 108 x 81 134 x 101 161 x 121 188 x 141 215 x 161 242 x 181 269 x 202 323 x 242 376 x 282 430 x 323 484 x 363 538 x 403 44 89 111 132 156 178 199 221 267 310 355 399 444 Zoom Ratio: 1. 1 x 12 · X1230S If the projector is 3 m from the screen, good image quality is possible for image sizes around 164". English Note: Remind as below figure, the space of 275 cm height is required when located at 3 m distance. 164" Height: 275 cm From base to top of image 3m Desired distance Minimum Screen Size (Min zoom) Desired From base to Distance Diagonal top of image (m) (inch) W (cm) x H (cm) (cm) <A> <B> <C> 1 2 2. 5 3 3. 5 4 4. 5 5 6 7 8 9 10 55 109 137 164 191 219 246 273 328 383 437 492 547 111 x 83 222 x 167 278 x 208 333 x 250 389 x 292 444 x 333 500 x 375 556 x 417 667 x 500 778 x 583 889 x 667 1000 x 750 1111 x 833 92 183 229 275 321 367 413 458 550 642 733 825 917 Zoom Ratio: 1. 0 x 13 How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. English · X1130/X1230 To obtain an image size of 50" set the projector at a distance 1. 9 m and 2. 1 m from the screen and adjust the zoom level accordingly. 50" Desired image size Height: 84 cm From base to top of image 2. 1 m 1. 9 m Desired distance Desired Image Size Diagonal (inch) <A> 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1. 1 x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Distance (m) Max zoom <B> 1. 1 1. 5 1. 9 2. 3 2. 6 3. 0 3. 4 3. 8 4. 5 5. 7 6. 8 7. 6 9. 4 11. 3 Min zoom <C> 1. 2 1. 7 2. 1 2. 5 2. 9 3. 3 3. 7 4. 2 5. 0 6. 2 7. 5 8. 3 10. 4 Top (cm) From base to top of image < D > 50 67 84 101 117 134 151 168 201 251 302 335 419 503 14 · X1230S To obtain an image size of 50" set the projector at a distance 0. 9 m from the screen and adjust the zoom level accordingly. English 50" Desired image size Height: 84 cm From base to top of image 0. 9 m Desired distance Desired Image Size Diagonal (inch) <A> 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1. 0 x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Distance (m) Max zoom <B> 0. 5 0. 7 0. 9 1. 1 1. 3 1. 5 1. 6 1. 8 2. 2 2. 7 3. 3 3. 7 4. 6 5. 5 Min zoom <C> 0. 5 0. 7 0. 9 1. 1 1. 3 1. 5 1. 6 1. 8 2. 2 2. 7 3. 3 3. 7 4. 6 Top (cm) From base to top of image < D > 50 67 84 101 117 134 151 168 201 251 302 335 419 503 15 User Controls Installation Menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. (POWER) on the control panel or English Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. The Installation menu includes the following options: · · · · · Projection method Menu location Keystone settings Language settings Reset to factory default function 4 Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. 5 Push "MENU" anytime to exit the menu and return to the Acer welcome screen. 16 English Acer Empowering Technology Empowering Key Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", and "Acer ePower Management". Press " " for more than one second to launch the Onscreen Display main menu to modify its function. Acer eView Management Press " " to launch "Acer eView Management". Please refer to the "Onscreen Display (OSD) Menus" section for more details. Acer eTimer Management Press " " to launch "Acer eTimer Management". "Acer eTimer Management" provides the reminding function for presentation time control. Please refer to the "Onscreen Display (OSD) Menus" section for more details. "Acer ePower Management"provides you one shortcut to save the lamp and projector's life. Please refer to the "Onscreen Display (OSD) Menus" section for more details. Acer ePower Management 17 Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. English Using the OSD menus · · To open the OSD menu, press "MENU" on the control panel or remote control. to enter a submenu After selecting the desired main menu item, press for feature setting. · · · · Use . to select the desired item and adjust the settings by using Select the next item to be adjusted in the submenu and adjust as described above. Press "MENU" on the control panel or remote control, the screen will return to the main menu. To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings. Main menu Setting Submenu 18 English Color There are many factory presets optimized for various types of images. · · Display Mode Bright: For brightness optimization. Blackboard: Blackboard mode can improve displayed color when you project onto darker surfaces. User 2: Memorize user's settings. · · · · Adjusts the brightness of the image. Brightness · · Press Press to darken the image. to lighten the image. Contrast Controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. · · Color Temperature Degamma Color R Color G Color B Press Press to decrease the contrast. [. . . ] Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. 41 Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Canada -- Low-power license-exempt radio communication devices (RSS-210) a Common information Operation is subject to the following two conditions: 1. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2. 4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. b Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ]