User manual ACER W510

[. . . ] 2. Unique USB Host Functions Hard disk player can read the file from the other standard USB Device 3. High speed transfer, USB2. 0 standard interface, compatible with USB1. 1 Hard disk player supports USB2. 0 with the highest rate of transmission up to 20Mbyte/s. 4. Large screen LCD with high resolution - 128 X 128 Dot Matrix 4 Gray With Backlight 5. Support multi music formats: including MP3 (MP3 of VBR format supported) and WMA 6. Convenient firmware upgrade The latest functions can be acquired through the firmware upgrade. New formats will be supported through the simple upgrading; meanwhile, the other functions will be provided constantly. 7. Support multi-languages display of ID3 Support various languages of ID3, including 1 English Manual simplified Chinese, traditional Chinese, Japanese, Korean and English 8. FM radio (87. 5MHz~108. 0MHz) Auto-scan and memorize desired channels are more convenient to listen to the FM radio. [. . . ] Refer to the below figure: (Note: At present it only supports the connection to standard Mass Storage USB devices which must use FAT or FAT16 file storage format, otherwise the system will display "Device Error"). 19 English Manual Playlist Function: You can select your favorite songs to play, which means the player can support Playlist function. Auto scan function: Press and hold the "Play" button in FM status to enter the Auto Scan mode, the player will automatically save the top 20 channels as CH01 to CH20. "PRESET" tag will change to "Auto Scan" tag and the channels will scroll automatically. After the scan is over, "Auto Scan" tag will automatically switch to "PRESET" tag. Press the "Menu" button to switch between the Preset mode and Manual Scan mode. The user can set some channels as needed or delete some disliked channels. After switching to Manual Scan mode, the "PRESET" tag will disappear. Under Manual Scan mode, press the "Right/Left" button to increase/decrease 0. 05MHz. Press and hold the "Right/Left" button to automatically scan the adjacent channels. If the channel that is found has not been saved, you can press the "Mode" button to save the channel. In this case, after pressing "Mode" button, "Memory" tag will show at the location of "Preset" tag, and then press the "Right/Left" button to select the saved destination, such as CH01 to CH20. Press the "Left" button to return to the upper menu and press the "Stop" button to exit the menu operation. Main menu Sub menu The menu items of "Mode" are the same as that after pressing and holding the "Mode" button. When the player is idle, the backlight will be off after the preset time duration. Press 26 MusePod the "Left/Right" button to select among "off/5 sec/10 sec/15 sec/20 sec/all". Press the "Menu" button to confirm and return to the main menu. Use "Display/Contrast" to set the contrast of the LCD screen. Use the scroll bar to display the current value, which is between 0 and 32. Press the "Left/Right" button to increase or decrease the value. Press the "Menu" button to confirm and return to the main menu. Use "Display/Time" to set the display method of the playback time of the playback interface. "Normal" means the time duration that has already elapsed in playback. Press the "Menu" button to confirm and return to the main 27 English Manual menu. Use "Display/ID3 language" to set the display language of ID3, which can be specified to simplified Chinese, traditional Chinese, Japanese, Korean and English. Press "Left/Right" button to make the selection, press "Menu" button to confirm and return to the main menu. [. . . ] Press and hold the "A-B" button will copy all files in the external USB Device to the USBData directory. Different directories will be created to contain the files in different devices. All files in one device will be stored in one directory, as shown below: When copying files, the whole directory will be copied if the folder is selected and switch to the copy screen. 36 MusePod After the copy is completed, it will return to the file list. Before the copy starts, the player will check if the remaining space is enough to contain the files to be copied. [. . . ]