User manual ACER V196HQL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ACER V196HQL. We hope that this ACER V196HQL user guide will be useful to you.


ACER V196HQL : Download the complete user guide (1502 Ko)

You may also download the following manuals related to this product:

   ACER V196HQL (2983 ko)
   ACER V196HQL (1746 ko)
   ACER V196HQL (2199 ko)
   ACER V196HQL (1730 ko)
   ACER V196HQL (1719 ko)
   ACER V196HQL (1746 ko)
   ACER V196HQL (352 ko)
   ACER V196HQL (1720 ko)
   ACER V196HQL (1925 ko)
   ACER V196HQL (751 ko)
   ACER V196HQL (1509 ko)
   ACER V196HQL (1911 ko)
   ACER V196HQL (1975 ko)
   ACER V196HQL (2249 ko)
   ACER V196HQL (1828 ko)
   ACER V196HQL (1822 ko)
   ACER V196HQL (285 ko)
   ACER V196HQL (1477 ko)
   ACER V196HQL (262 ko)
   ACER V196HQL (1814 ko)
   ACER V196HQL (634 ko)
   ACER V196HQL (1472 ko)
   ACER V196HQL (1836 ko)
   ACER V196HQL (1763 ko)
   ACER V196HQL QUICK START GUIDE (2240 ko)
   ACER V196HQL QUICK START GUIDE (2091 ko)
   ACER V196HQL QUICK START GUIDE (2983 ko)

Manual abstract: user guide ACER V196HQL

Detailed instructions for use are in the User's Guide.

[. . . ] Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated. Acer Altos G530 Series Model Name : Part Number: Purchase Date: Place of Purchase: Acer and the Acer logo are registered trademarks of Acer Inc. [. . . ] When set to Secondary, it enables support for Secondary PATA Controller. Option Both Disabled Primary Secondary Onboard S-ATA Channels Enables or disables the integrated SATA Controller. Enabled Disabled 89 Parameter Configure S-ATA as RAID Description When set to Enabled, the SATA channels are reserved to be used as RAID. Defines priority between SATA channels. Option Disabled Enabled S-ATA Ports Definition A 1-3rd M/A 2-4th M A 1-4th M/ A 2-3rd M Mixed P-ATA/ S-ATA Lets you remove a PATA and replace it by SATA in a given channel. Press Enter to access the Mixed PATA/ SATA submenu. Primary IDE Master Specifies the current configuration of the IDE device connected to the master port of the primary IDE channel. Specifies the current configuration of the the IDE device connected to the slave port of the primary IDE channel. Specifies the current configuration of the IDE device connected to the master port of the secondary IDE channel. Press Enter to access the Secondary Master submenu. Primary IDE Slave Secondary IDE Master Secondary IDE Slave Specifies the current configuration of the IDE device connected to the slave port of the secondary IDE channel. Specifies the current configuration of the IDE device connected to the master port of the third IDE channel. Press Enter to access the Third Master submenu. Third IDE Master 90 4 BIOS setup Parameter Fourth IDE Master Description Specifies the current configuration of the IDE device connected to the master port of the fourth IDE channel. Used with older IDE devices with longer spin up times. Option Hard Disk Write Protect IDE Detect Time Out (Sec) Disabled Enabled 0 5 15 20 25 30 35 ATA(PI) 80-pin Cable Detection Select the mechanism for detecting 80pin ATA(PI) cable. Host & Device Host Device 91 Mixed P-ATA / S-ATA The Mixed P-ATA/S-ATA submenu lets you specify the channel for the Parallel ATA Primary channel and Serial ATA device. Parameter First/Second ATA Channel 3rd/4th ATA Channel Description Select channel mode. Option P-ATA M-S SATA M-S Select channel mode. A1-3rd M/A2-4th M A1-4th M/A2-3rd M None 92 4 BIOS setup Primary/Secondary/Third/Fourth IDE Master/Slave These items let you select the IDE hard disk parameters that the system supports. Parameter Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Description Type of IDE device. Ultra DMA mode of the selected IDE device. Option Ultra DMA 93 Parameter S. M. A. R. T. Description Indicates if the selected device supports S. M. A. R. T. Selects the drive type. Option Type Auto Not Installed CD-ROM ARMD LBA/Large Mode Selects the hard disk drive translation method. Enables or disables remapping of overlapped PCI memory above the physical memory. When set to Spare, a DIMM slot is kept in reserve for standby in the event a significant failure occurs in the primary DIMM. If a threshold of runtime error occurs in the primary DIMM, that DIMM will have its data copied to the spare DIMM. Option Disabled Enabled Memory Remap Feature Memory Sparing Enabled Disabled Disabled Spare 103 Boot The Boot menu allows you to set the drive priority during system bootup. Press Enter to enter the submenu screen of the parameters shown in the screen below. 104 4 BIOS setup Boot Settings Configuration The Boot Settings Configuration submenu lets you specify the preferred settings for system bootup. Parameter Quick Boot Description Allows the system to boot faster by skipping some POST routine. When set to Enabled, BIOS setup is in graphical mode and displays only an identification logo during POST and while booting. After booting the screen displays the operating system prompt (such as DOS) or logo (such as Windows). If any error occurs while booting, the system automatically switched to text mode. Option Enabled Disabled Disabled Enabled Quiet Boot 105 Parameter Bootup Num-Lock PS/2 Mouse Support Description Activates the Numeric Lock function upon booting. Enable this parameter if you intend to use a mouse or trackball with a PS/2 interface. Option Off On Auto Enabled Disabled Enabled Disabled POST Error Pause When this parameter is Enabled, you will be prompted when an error is detected during boot up. When set to Disabled, the system will boot with no intervention, if possible. When this parameter is Enabled, you will be prompted to press F2 to run BIOS during boot up. Allows BIOS to scan Flash ROM for user binaries. Hit `F2' Message Display Scan User Flash Area Enabled Disabled Disabled Enabled 106 4 BIOS setup Boot Device Priority The Boot Device Priority submenu lets you specify the boot search sequence during the POST process. [. . . ] Press Ctrl+Alt+Del to reboot the server. 170 Appendix C: SATA RAID configuration Creating a RAID 1 volume 1 2 3 4 After rebooting the server, press Ctrl+E to enter the SATA RAID Configuration screen. An array selection window displays the devices connected to the current controller. Use the arrow keys to select a specific drive, then press the spacebar to associate the selected drive with the current array. In the menu, the selected drive's indicator will change from READY to ONLINE A[array number]-[drive number]. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER V196HQL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER V196HQL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.