User manual ACER S200HQL

[. . . ] The socket outlet should be installed near the equipment and be easily accessible. · This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company. iv Care And Cleaning · Cleaning. · Slots and openings on the back or top of the cabinet are for ventilation. [. . . ] Check the option `Search for the best driver in these locations' and also check `Search removable media', then click Next. Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6. When complete, the wizard should have found and selected the BenQ driver on the CD appropriate to your monitor model, in this case `BenQ S200HQL' in the location `d:\driver\BenQS200HQL. inf ' or similar. The drive letter for your CD drive may differ from the example above depending upon your system ­ it may be `D:' or `E:' or `F:' etc. 9. Select (single-click) the file named `BenQ S200HQL' on the CD, and click the Next button. This will copy and install the appropriate monitor driver files to your computer. 10. Click Finish. This will close the wizard and return you to the Monitor Properties window, now renamed BenQ S200HQL Properties. 11. Click Close, OK, and OK. This will close the Display Properties windows. You do not need to restart Windows XP, as the BenQ LCD monitor drivers will operate immediately with no further action required by you. Getting the most from your BenQ monitor 17 How to install on Windows 2000 system You do not need to follow this instruction if you are installing onto a computer which has a Windows XP (or later) version system. In that case, see the instructions at How to install on Windows XP system on page 17. 1. Open Display Properties. The quickest shortcut to Display Properties is through the Windows desktop. Alternatively, the Windows menu to Display Properties is located in Control Panel. In Windows 2000 version, Control Panel is located under the Settings menu item. Click the Settings tab and the Advanced button. The Advanced Display Properties window will display. 3. In Windows 2000, click OK. This will close the Advanced Display Properties window, and return you to the Display Properties window. Should you wish to do so, this is where you can change the screen resolution (area and color). See How to adjust the screen resolution on page 21 for details. Getting the most from your BenQ monitor 19 14. Click OK. This will close the Display Properties window, and if you made any changes to the screen resolution, Windows 2000 will prompt you for confirmation to effect the changes, and further confirmation to accept the changes. Click OK and Yes respectively. 20 Getting the most from your BenQ monitor 1 15 How to adjust the screen resolution 1 Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. The best possible picture for your S200HQL is achieved with a resolution of 1280 x 1024. This is called "Native Resolution" or maximal resolution ­ that is, the clearest picture. Lower resolutions are displayed on a full screen through an interpolation circuit. Image blurring across pixel boundaries can occur with the interpolated resolution depending upon the image type and its initial resolution. To take full advantage of LCD technology you should select the native resolution setting of 1280 x 1024. 1. Open Display Properties and select the Settings tab. You can open Display Properties by right-clicking on the Windows desktop and selecting Properties from the pop-up menu. 2. Use the slider in the `Screen area' section to adjust the screen resolution. Select the recommended resolution of 1280 x 1024 then click Apply. If you select some other resolution, be aware that this other resolution is interpolated and may not accurately display the screen image as well as it could do at the native resolution setting. 3. [. . . ] Press the or keys to select SYSTEM and then press the ENTER key to enter the menu. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item. To return to the previous menu, press the MENU button. Function Operation Selects the D-sub (analog) Press the or or DVI (digital) input. this to change the input to that appropriate to your video cable connection type. [. . . ]