User manual ACER H5360 BD

[. . . ] TRADEMARK ACKNOWLEDGEMENT : · PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation. · Apple, Mac and ADB are registered trademarks of Apple Computer, Inc. · VESA and SVGA are trademarks of the Video Electronics Standard Association. · All other trademarks are the property of their respective owners. CONTENTS Page Page PROJECTOR FEATURES . . . . . . . . . . . . . . . . 2 PREPARATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SETTING UP THE PROJECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CONNECTING YOUR DEVICES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 USING THE REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TURNING ON THE POWER . . . . . . . . . . . 14 TURNING OFF THE POWER . . . . . . . . . 16 ADJUSTING THE VOLUME . . . . . . . . . . . 17 TEMPORARILY MUTING THE SOUND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ADJUSTING THE POSITION. . . . . . . . . . 18 USING THE AUTOMATIC ADJUSTMENT FEATURE . . . . . . . . . . . . . . 19 CORRECTING KEYSTONE DISTORTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 USING THE MAGNIFY FEATURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 FREEZING THE SCREEN . . . . . . . . . . . . . . 21 SIGNAL SEARCHING. . . . . . . . . . . . . . . . . . . . . 22 SELECTING THE ASPECT RATIO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 TEMPORARILY BLANKING THE SCREEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 USING THE MENU FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 OPERATING THE PC SCREEN . . . . . 24 THE LAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 THE AIR FILTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 OTHER CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 REGULATORY NOTICES. . . . . . . . . . . . . . . 30 1 PROJECTOR FEATURES This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. [. . . ] Then, wipe lightly with a soft, dry cloth. ATTENTION · Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly. · Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner. · Do not polish or wipe with hard objects. 29 LCD Projector CP-S318/CP-X328 USER'S MANUAL Thank you for purchasing this projector. Vol. 2 (Extended) WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual · The reproduction, transmission or use of this document or contents is not permitted without express written authority. TRADEMARK ACKNOWLEDGEMENT : · PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation. · Apple, Mac and ADB are registered trademarks of Apple Computer, Inc. · VESA and SVGA are trademarks of the Video Electronics Standard Association. · All other trademarks are the property of their respective owners. CONTENTS Page MULTIFUNCTIONAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED . . . . . . 7 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 WARRANTY AND AFTER-SERVICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For "TECHNICAL" see the end of this manual. 1 MULTIFUNCTIONAL SETTINGS This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN, OPTION. The image becomes irregular, or lacks color. ) · AUTO mode may not function correctly with a PAL60 signal and certain other signals. · For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. Select HDTV Signal Mode: 1080i 1035i · If the selected HDTV mode is incompatible with the input signal, the picture may be distorted. On/Off SYNC ON G Mode: TURN ON TURN OFF Selecting TURN ON turns on the SYNC ON G mode. · In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal. AUTO VIDEO HDTV SYNC ON G 4 SCREEN Menu With the SCREEN menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table. MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION BLANK START UP MyScreen MyScreen Size MyScreen Lock MyScreen ORIGNAL : SELECT SCREEN Menu Item Description Example : SCREEN Menu (BLANK) BLANK Selection of BLANK Screen: MyScreen ORIGINAL . . The BLANK Screen is displayed when the screen has been erased (i. e. , made to vanish) by manipulating the BLANK button (please refer to the "Temporarily Blanking the Screen" section of the separate booklet, Vol. MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen (or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen. Option screens: Various colored non-patterned (plain) screens displayed within the Menus. [. . . ] (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code `06H' to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (`06H'+`00H'+ type (2 bytes) +`00H'+`00H') to the projector. (3) The projector returns the response code `06H' to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (`04H'+`00H'+ type (2 bytes) +`00H'+`00H') to the projector. (2) The projector in creases the setting value on the above setting code. [. . . ]