User manual ACER G236HL

[. . . ] The copyright of this manual is reserved by Samsung Electronics, Co. , Ltd. The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co. , Ltd. The ACER logo and SyncMaster are the registered trademarks of Samsung Electronics, Co. , Ltd. Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation. [. . . ] If the resolution is set to the optimal resolution, the aspect ratio does not change whether the <Image Size> is set to <Auto> or <Wide>. Menu H-Position Menu V-Position You can adjust the horizontal position of the OSD. You can adjust the vertical position of the OSD. SETUP&RESET Menu Reset Description Use this function to restore the visual quality and color settings to the factory defaults. · <No> - <Yes> Menu Transparency You can select the transparency of the OSD. · <Off> - <On> 3-6 Using the product Menu Language Select a language for the OSD. Description The selected language is only applied to the product OSD. Used to set the product so that it automatically turns off at a certain time. · On Timer <Off> - <On> Used to set the product so that it automatically turns on at a certain time. · <Off> - <On> On Timer Source Used to adjust the mode when the product is automatically turned on. · <Analog> - <Client> On Timer Volume Display Time Automatically adjusts the volume to a certain level when the product is turned on. · <5 sec> - <10 sec> - <20 sec> - <200 sec> Customized Key You can set the function of the Customized Key to one of the following. · <MagicBright> - <MagicColor> - <Color Effect> - <Image Size> INFORMATION Menu INFORMATION Description Shows the frequency and resolution set on the PC. Using the product 3-6 4 4-1 Installing the Software Using Windows XPe What is XPe Client? An Microsoft Windows XP Embedded(XPe) client uses the Microsoft Windows XP Embedded operating system. When an XPe client is connected to a Citrix ICA server or another server that can provide the Microsoft RDP service, data for the keyboard, mouse, audio/video and display are transmitted through the network between the client and the server. Connectable Servers · A Citrix ICA (Independent Computing Architecture) Server · · · · · · A Microsoft Windows 2000/2003 Server where the terminal services and Citrix MetaFrame are installed A Microsoft Windows NT 4. 0 Server where the Citrix MetaFrame is installed A Microsoft Windows 2000 Server where the terminal services are installed A Microsoft Windows 2003 Server A Microsoft Windows XP Professional This manual describes the functions provided by the XPe Client. The client software for the remote desktop connection must be installed on the client. However, because the remote desktop transmits a minimum set of data including the display data and keyboard data to control the host remotely, a broadband Internet connection is not required. When running a remote desktop on Windows XP Professional, you cannot use the operating system of your computer. · Enabling Your Computer as the Host You must enable the Remote Desktop feature to control it from another computer. You must be logged on as an administrator or a member of the Administrators group to enable Remote Desktop on your computer. Follow these steps: · · · · Open the System folder in the Control Panel. Click Start, point to Settings, click Control Panel, and then double-click the System icon. On the Remote tab, select the "Allow users to connect remotely to this computer" checkbox. Ensure that you have the proper permissions to connect to your computer remotely, and click OK. Leave your computer running and connected to the client's network with Internet access. · Start a Remote Desktop Session on the Client Once you have enabled your host computer to allow remote connections and installed the client software on a Windowsbased client computer, you are ready to start a Remote Desktop session. You must first establish a virtual private network connection or remote access service connection from your client computer to your host computer. [. . . ] Set the resolution and the frequency to the appropriate values in the graphics card Refer to the (Standard Signal Mode Table) Is the graphics card configured correctly?Did you change the resolution and the frequency appropriate to the product?Set the resolution and the frequency to the appropriate values in the graphics card Refer to the (Standard Signal Mode Table) The color is displayed in 16 bit (16 colors). Windows ME/XP/2000 : Set the color again by selecting Control Panel Display Settings. [. . . ]