User manual ACER ASPIRE ZS600G

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ACER ASPIRE ZS600G. We hope that this ACER ASPIRE ZS600G user guide will be useful to you.


ACER ASPIRE ZS600G : Download the complete user guide (567 Ko)

You may also download the following manuals related to this product:

   ACER ASPIRE ZS600G (661 ko)
   ACER ASPIRE ZS600G (606 ko)
   ACER ASPIRE ZS600G (456 ko)
   ACER ASPIRE ZS600G (606 ko)
   ACER ASPIRE ZS600G (473 ko)
   ACER ASPIRE ZS600G (530 ko)
   ACER ASPIRE ZS600G (648 ko)
   ACER ASPIRE ZS600G (455 ko)
   ACER ASPIRE ZS600G (600 ko)

Manual abstract: user guide ACER ASPIRE ZS600G

Detailed instructions for use are in the User's Guide.

[. . . ] Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective companies. ii IMPORTANT SAFETY INSTRUCTIONS 1. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. [. . . ] Other operating systems require this parameter to be set to Disabled. BIOS Utility 3-15 Hard Disk 32-bit Access Enabling this parameter improves system performance by allowing the use of the 32-bit hard disk access. This enhanced IDE feature works only under DOS, Windows 3. x, Windows Windows 95, and Novell NetWare. If your software or hard disk does not support this function, set this parameter to Disabled . CD-ROM Drive DMA Mode This parameter allows you to enable or disable the CD-ROM drive DMA mode. Set this parameter to Enabled to enable the DMA mode for the CD-ROM drive. This improves the system performance since it allows direct memory access to the CD-ROM. To deactivate the function, set the parameter to Disabled . 3. 5 3-16 User' Guide s Power Management The Power Management menu lets you configure the system power management features. The following screen shows the Power Management parameters with their default settings: Power Management Page 1/1 Power Management Mode . . . . . . . . . . . . . . . . . . [Enabled Disabled] IDE Hard Disk Standby Timer . . . . . . . . . [---15] Minute(s) System Sleep Timer . . . . . . . . . . . . . . . . . . [ 2---] Minute(s) Stop CPU Clock in Sleep State . . . . [---No] = Move Highlight Bar, = Change Setting, F1 = Help 3. 5. 1 Power Management Mode This parameter allows you to reduce power consumption. When this parameter is set to Enabled, you can configure the IDE hard disk and system timers. Setting to Disabled deactivates the power management feature and all the timers. IDE Hard Disk Standby Timer This parameter allows the hard disk to enter standby mode after inactivity of 1 to 15 minutes, depending on your setting. Note that the CD-ROM drive mentioned above refers to an IDE CD-ROM drive. When setting the boot options for a SCSI CD-ROM drive, see section 3. 7. 1 for details on SCSI device boot parameters. 3. 7 BIOS Utility 3-21 Advanced Configuration The Advanced Configuration option allows you to configure the advanced system memory functions. Do not change any settings in the Advanced Configuration if you are not a qualified technician to avoid damaging the system. The following screen shows the Advanced Configuration parameters: Advanced Configuration Onboard Devices Configuration PnP/PCI System Configuration Memory/Cache Configuration Non-PnP ISA Device Configuration = Move Highlight Bar, = Change Setting, F1 = Help 3. 7. 1 3-22 User' Guide s Onboard Devices Configuration The Onboard Devices Configuration allows you to configure the onboard communication ports and the onboard devices. Selecting this option from the Advanced Configuration menu displays the following screen: Onboard Devices Configuration Page 1/2 Serial Port 1 . . . . . . . . . . . . . . . . . . . . . . . [Enabled Disabled] Base Address . . . . . . . . . . . . . . . . . . . . . [---3F8h] IRQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [4 --] Serial Port 2 . . . . . . . . . . . . . . . . . . . . . . . [Enabled ] Base Address . . . . . . . . . . . . . . . . . . . . . [2F8h] IRQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [3 3] Parallel Port . . . . . . . . . . . . . . . . . . . . . . . [Enabled ] Base Address . . . . . . . . . . . . . . . . . . . . . [378h] IRQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [7 5] Operation Mode . . . . . . . . . . . . . . . . . . . [ EPP [ Standard ] ECP DMA Channel . . . . . . . . . . . . . . . . . . [ - ] = Move Highlight Bar, PgDn/PgUp = Move Screen = Change Setting, F1 = Help The following screen shows page 2 of the Onboard Devices Configuration menu: BIOS Utility 3-23 Onboard Devices Configuration Page 2/2 Onboard Floppy Disk Controller . . . . . . [Enabled Disabled] Onboard IDE Primary Channel . . . . . . . . . [Enabled ] Onboard PS/2 Mouse (IRQ 12) . . . . . . . . . [Enabled ] Onboard USB . . . . . . . . . . . . . . . . . . . . . . . . . [Disabled] USB Legacy Mode . . . . . . . . . . . . . . . . . . [--------] Onboard SCSI11 . . . . . . . . . . . . . . . . . . . . . . [Enabled Boot from SCSI1 Device . . . . . . . . . . . . [Enabled Onboard SCSI2 . . . . . . . . . . . . . . . . . . . . . . . [Enabled Boot from SCSI2 Device . . . . . . . . . . . . [Enabled Disabled] ] ] ] Onboard Ethernet Chip . . . . . . . . . . . . . . . [Disabled] Boot from SCSI1 Device . . . . . . . . . . . [Enabled ] Onboard SCSI2 . . . . . . . . . . . . . . . . . . . . . . . [Enabled ] Boot from SCSI2 Device . . . . . . . . . . . [Enabled ] Onboard Ethernet Chip . . . . . . . . . . . . . . . [Enabled ] = Move Highlight Bar, PgDn/PgUp = Move Screen = Change Setting, F1 = Help Serial Port 1 This parameter allows you to enable or disable the serial port 1. The Base Address and IRQ items are configurable only if this parameter is enabled. BASE ADDRESS This function lets you set a logical base address for serial port 1. The options are: · 3F8h · 2F8h · IRQ 3E8h · 2E8h This function lets you assign an interrupt for serial port 1. The options are IRQ 3 and 4. 3-24 User' Guide s Serial Port 2 This parameter allows you to enable or disable the serial port 2. The Base Address and IRQ items are configurable only if this parameter is enabled. BASE ADDRESS This function lets you set a logical base address for serial port 2. The options are: · 3F8h · 2F8h · IRQ 3E8h · 2E8h This function lets you assign an interrupt for serial port 2. They can not use the same base address at the same time. Parallel Port This parameter allows you to enable or disable the parallel port. BASE ADDRESS This function lets you set a logical base address for the parallel port. The options are: · 3BCh · 378h IRQ · 278h This function lets you assign an interrupt for the parallel port. [. . . ] The screw hole is located on the side of the housing. 6. Connect the power cable and signal cables to the external device. 5. 1. 2 To remove a 3. 5-inch storage device: 1. See section 4 for more information on opening the housing panels. 2. Detached the external device by removing the screw located on the side and then gently pull out the device. 4. Remove the four screws and detach the 3. 5-inch from the drive guide. 18 Installation Guide 5. 2 Installing and Removing a 5. 25-inch Storage Device The housing comes with a drive guide for installing 5. 25-inch internal storage devices. 5. 2. 1 1. To install a 5. 25-inch storage device: Open the front panel door and remove the left panel. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER ASPIRE ZS600G




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER ASPIRE ZS600G will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.