User manual ACER ASPIRE E1-451G

[. . . ] If you are not sure of the type of power available, consult your dealer or local power company. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts, which could result in a fire or electric shock. [. . . ] Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls could result in damage; extensive work by a qualified technician might then be required to restore the product to normal condition. If the product exhibits a distinct change in performance, indicating a need for service. 12 Use only the proper type of power supply cord set (provided in your accessories box) for this unit. Always disconnect the power cord from the wall outlet before servicing or disassembling this equipment. Do not overload an electrical AC outlet, power strip, or convenience receptical. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip input rating. 14 Some products are equipped with a three-wire electrical grounding-type plug that has a third pin for grounding. Do not defeat the safety purpose of the grounding-type plug by trying to insert it Conforms to the EMC Directive 89/336/EEC as attested by conformity with the following harmonized standards: EN 55013: 2001+A1: 2003: Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55020: 2002+A1: 2003: Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methods of measurement of Radio Interference characteristics of Information Technology Equipment. EN55024: 1998/A1: 2001; AS/NZS CISPR 24: 1997: Information technology equipment-Immunity characteristics-Limits and methods of measurement. Conforms to the Low Voltage Directive 73/23/EEC as attested by conformity with the following harmonized standard: EN60065: 1998: Audio, video and similar electronic apparatus-safety requirements. For advanced settings, please refer to following page: Adjusting the picture quality 1 2 3 4 Press the MENU key to bring up the OSD. The Picture menu can be used to adjust the brightness, contrast, colour, sharpness and other image-related qualities. Adjusting the audio settings 1 2 3 4 Press the MENU key to bring up the OSD. The Audio menu can also be used to adjust the treble, bass, balance, sound effect and Steady sound. Adjusting the channel management 1 2 3 4 Press the MENU key to bring up the OSD. The Channel management menu can be used to set the channel namings, Auto Scan, Manual Scan channel and other related settings. Adjusting the settings 1 2 3 Press the MENU key to bring up the OSD. The Settings menu can be used to adjust the menu language and other important settings. The options available on the OSD may vary depending on the TV signal source. 10 Advanced features Lock This Channel Lock This Channel allows you to enter a password and effectively stop anyone without the password from watching TV Channel. English To enable this feature: Setting a personal PIN 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate to the (see note) Settings menu. Type it again and press OK to reconfirm. 4 Press MENU to exit. The default PIN for this TV is "0000. " First enter "0000" when you want to change the PIN. If you forget your PIN, please enter 6163 to reset. 11 Locking TV Channel English 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate to the Lock This Channel. Channel Management menu. (see page 11 note) Reorder for channels The first time you completed the setup wizard, all available channels were listed. If you need to reorder for new channels, please follow the steps below: Reordering for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. 3 Highlight Reorder. Move to the right channel number and press OK to reconfirm. 4 Select OK and press MENU to exit. 12 Re-scan for channels English The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below: Scanning for channels 1 Press the MENU key on the remote control to bring up the OSD. 2 Use the directional keys to navigate and select Channel Management. Highlight Auto Scan. [. . . ] Make sure the volume is not set to minimum or the sound is not set to mute. Reception other than those of broadcasting stations can be considered. Picture is not clear. · · · · · Make sure the antenna cable is properly connected. Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being connected at the same time. The 'ghost' or double image may be caused by obstruction to the antenna due to high-rise buildings or hills. [. . . ]