User manual ACER AL1511

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ACER AL1511. We hope that this ACER AL1511 user guide will be useful to you.


ACER AL1511 : Download the complete user guide (310 Ko)

You may also download the following manuals related to this product:

   ACER AL1511 (168 ko)
   ACER AL1511 Install Guide (753 ko)

Manual abstract: user guide ACER AL1511

Detailed instructions for use are in the User's Guide.

[. . . ] As an ENERGY STAR® Partner our company International has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. WARNING: To prevent fire or shock hazard, do not expose the monitor to rain or moisture. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. If the monitor falls, it can injure a person and cause serious damage to the appliance. [. . . ] Connect the AC-power cord into your LCD monitor's DC-power-input. The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor. NOTES A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0. 75mm2 or H05VVH2-F2 3G 0. 75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0. 75mm2) shall be used. 4 CONTROLS AND CONNECTORS CABLE CONNECTIONS Connect one end of the 15-pin VGA cable to the back of the monitor and connect the other end to the computer's D-Sub port. Connect the audio cable: (Option-only for Audio model)Connect the audio cable between the monitor's audio input and the PC's audio output (green port). Connect the audio cable: Plug the power cable of your monitor into a nearby outlet. ATTENTION: If the AC outlet is not grounded, install the proper grounding adapter (not supplied). Connect the signal cable: 3 Figure 1 1. Signal Cable Power Cable Audio cable (Option-only for Audio model) 5 ADJUSTING THE VIEWING ANGLE · For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. · Hold the stand so you do not topple the monitor when you change the monitor's angle. · You are able to adjust the monitor's angle from -5° to 20°. Figure 2 NOTES · Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. · Careful attention is required not to catch your fingers or hands when you change the angle. 6 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. /Power Key 7 FRONT PANEL CONTROL · /Power Button: Press this button to turn the monitor ON or OFF, And display the monitor's state. Green Orange -- -- Power On mode. Power off mode. · Power Indicator: · MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status. Activates the volume control when the OSD is OFF (only for Audio model) or navigate through adjustment icons when OSD is ON or adjust a function when function is activated. · </Volume: · >/Volume: Activates the volume control when the OSD is OFF (only for Audio model) or navigate through adjustment icons when OSD is ON or adjust a function when function is activated. · Auto Adjust button / Exit: 1. 2. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. [. . . ] With a wrong phase adjustment the picture has horizontal disturbances in light picture. For FOCUS and CLOCK adjustment use "dot-pattern" or win 95/98 shut-down mode pattern. 13 ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector's screws. Check the signal -cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode , set the computer to display mode given in the following table(See page 17). 14 APPENDIX SPECIFICATIONS LCD Panel Driving system Size Pixel pitch Brightness Contrast Viewable angle Response time Video H-Frequency V-Frequency TFT Color LCD 38. 1cm(15. 0") 0. 297mm( H )x 0. 297mm( V ) 250cd/m2 (Typical) 350:1(Typical) 140° (H) 125° (V) 25 ms(Tr+Tf)Tr=8ms/Tf=17ms R, G, B Analog Interface 30KHz ­ 60KHz 55-75Hz 16. 2M Colors 80MHz 1024 x 768 @75Hz VESA DDC1/2BTM 30W 3W D-Sub 15pin Analog:0. 7Vp-p(standard), 75 OHM, Positive Horizontal : 304. 1mm Vertical : 228. 1mm 100~240VAC, 47~63Hz Operating Temp: 0° to 40°C Storage Temp. : -20° to 60°C Operating Humidity: 10% to 85% 345(W)×353(H)×160(D)mm 2. 7kg Unit (net) Display Colors Dot Clock Max. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER AL1511




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER AL1511 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.